EDF Ducted Fan XFly Galaxy X3 XFLY-Model 30mm 12 blades + 4S Motor 6800KV

EDF Ducted Fan XFly Galaxy X3 XFLY-Model 30mm 12 blades + 4S Motor 6800KV

Features

• First class mold design
• Mate finished surface for EDF and blades
• Advanced injection molding process
• CNC metal spinner with a laser technology used for the spiral pattern
• Composte material with high strength and tenacity
• Active noise cancellation
• High speed running
• Turbine-like sound

The motor and fan unit comes assembled and balanced from the factory.

Measures

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Technical Specifications

• Motor : Brushless 1108-KV6800
• Motor: shaft 3mm
• Rotor: 12 blades
• Internal diameter: 30mm
• External diameter: nc
• External diameter w/lip: nc
• Combo max thrust: 240g
• Weight: 15g (combo EDF + lip + motor )
• Recommended max. rotation speed: nc

Content

• 1x Combo XFly Galaxy X3 Model 4s 30mm EDF
• 1x Intake Ring
• PK 3.5mm connectors