Manufacturers

Specials

Viewed products

  

Purchase a gift voucher

  

EDF Ducted Fan Wemotec Mini Fan evo / HET 1W-35

MFE-1W35

New product

Wemotec

Modern high efficiency multi bladed fan unit. The fan unit comes completely mounted with a HET 1W35 motor.  This Pack is precisely assembled, balanced and tested by us.

More details

Available

By buying this product you can collect up to 120 loyalty points. Your cart will total 120 loyalty points that can be converted into a voucher of $4.09.


$137.28

Instead of $142.96

Pack content

Data sheet

Weight (gr): 205
EDF thrust (categorization) 1-2kg, 2-3kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 70
Blades: 9
Turbine shroud Synthetic
EDF Rotor Synthetic
Turns/min/Volt (Kv): 4000
Motor Type: In-Runner
Motor Diameter (mm): 28
Shaft diameter (mm): 4
Battery Cells: 4s - 14.8v

More info

EDF Ducted Fan Wemotec Mini Fan evo / HET 1W-35

Modern high efficiency multi bladed fan unit. The fan unit comes completely mounted with a HET 1W35 motor. The unit is assembled and checked at factory, precision balanced and harmonically tuned.

This Pack, composed with the EDF unit, the motor and the assembling and balancing service, is precisely set, harmonically balanced and tested by us.

This is an extremely strong, yet affordable 4s setup for models weighting 1.8 - 2.4 kg.
Since current can reach up to 100 A readily installed, we recommend 5.000 mAh cells 30 C or better and a good 120 A speed controller. Throttle management is recommended to reach a good flying time.

Set comprises

  • 1 x Mini Fan evo ducted fan unit
  • 1 x Intake Lipo
  • 1 x HET 1w35
  • 1 x Heatsink
  • PK plugs and shrink tune
  • Screws
  • English Instructions

Readings

 
4s
 Voltage
 14.8 V
 Current
 100.0 A
 Power
1480W
 rpm  tbc
 Thrust
2,05 kp
 Efflux velocity    
74,71m/s
 Efficiency
0.51
 Controller
>= 120A / LV
 Rec. Battery 
 3000-3800 mAh  

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Readings:  We measure with a constant voltage of 3.7 V / cell. Current and thrust are measured with a small intake lip (r=6 mm) at 21° C, 50m asl and standard pressure. Depending on battery, controller and installation you may see higher or lower figures.
 
 inner diameter:  69,0 mm
 outer diameter:  72,0 mm
 length of shroud:  60 mm, w/o intake lip
 weight, complete:  205 grams (opt. intake rin + 15g)
 fan swept area:  29,40 sqcm
 rotor:  9 blades, nylon (glass reinforced)  
 rec. thrust tube dia.:   56 mm diameter
 Timing ESC:  approx. 18° (6-pole motor)
 PWM:  16 kHz


Motor specifications

Typhoon HET EDF 1W-35 Motor 28mm 4000Kv, for pylon / EDF jets up to 2,4 Kgrams. Suitable for HET EDF unit 6904, WemoTec Mini Fan or equivalent. 5S power beast that generates 1800 watts (4-5 blades EDF units). Specificaly developed for the Mini Fan evo 9 blades 70mm unit to generate 2,05kg thrust and 100A.

  • Diameter : 28 mm
  • Length : 57  mm
  • Shaft Dia. : 4 mm
  • Weight : 155 grams
  • No load current(lo) : 5.4
  • Internal resistance: 5.35 
  • KV : 4000
  • No. of poles: 6
  • Max Current: 130 A (5S)
  • Max efficiency: 87%
  • Power Nominal: 1800 Watts on 5 cells (4-5 blades units only).
  • Advance timing : 18° Middle PWM: 16 Khz 

Mini Fan evo unit Specifications

  • Material: Nylon, ABS, Aluminium
  • Weight: approx. 57 g (with intake ring + 15g)
  • Power: 500-3.000 W
  • max rpm: 60.000
  • Rotor: 9 blades(68 mm) glass reinforced
  • Kit comprises: all components, english instruction
  • Ageom.: 29,4 qcm
  • Aeff.: 26,2 qcm
  • Thrust: 6-30 N
  • Thrust tube should be 56 mm in diameter for best performance. You can find several versions of such tubes in our shop.

     
  • Reviews
  • Write a review

    Accessories

    30 other products in the same category:

    Customers who bought this product also bought:

    Follow us on Facebook