EDF Ducted Fan WEMOTEC Mini Fan evo 65mm (9-blades) + HET 2W-16 4200Kv (CCW)

WEM-MFE65-2W16

New product

Wemotec

Combo 65mm / 9 blades / HET 2W16 4200Kv (inrunner) / 3S / 133g
> 3S (11.1V) : 45A / 920g / 500W

More details

Available on order

By buying this product you can collect up to 99 points . Your cart will total 99 points that can be converted into a voucher of US $2.34 .


US $117.02

Instead of US $151.34

Accessories and other versions

Must have accessories and options

Data sheet

Weight (gr): 133
EDF thrust (categorization) 0-1kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 64
EDF Outside Diameter (mm): 67
EDF Inner Diameter (mm) : 65
Rotor Diameter (mm): 64
Blades: 9
Turbine shroud Carbon
EDF Rotor Synthetic
No. of Magnet Poles: 6
Turns/min/Volt (Kv): 4200
Motor Type: In-Runner
Motor Diameter (mm): 28
Shaft diameter (mm): 3.17
Battery Cells: 3s - 11.1v
Connection: PK 3.5mm

More info

EDF Ducted Fan Wemotec Mini Fan evo 65mm + Motor HET 2W-16 4200Kv

Modern high efficiency multi bladed 65mm fan unit. The fan unit comes completely mounted with a HET 2W16 motor. This Pack is precisely assembled, balanced and tested by us. For 3s Lipo 45A and model until 1 kg.

This Pack, composed with the EDF unit, the motor and the assembling and balancing service, is precisely set, harmonically balanced and tested by us.

Readings

 Description / LiPo    3s (11.1V)   
 Thrust: 920 gr
 Current: 45 A
 Power: 500 W
 Rec. ESC:  55 A / LV 
 Rec. Battery:  nc
About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.
The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

  • Material: Carbon reinforced Nylon
  • Rotor: ABS
  • Spinner: Alloy
  • Internal diameter: 65mm
  • Rotor diameter: 64mm 9-blades
  • External diameter: 67mm
  • Weight: 133gr (EDF without lip + motor)
  • Motor: 4200Kv 28-40 (shaft 3.17mm) in-runner 3-6S 
  • Recommended max. rotation speed: nc
  • Ageom. : nc
  • Aeff. : nc
  • Max Current: 75A
  • Max Efficiency: 86%
  • Power nominal: 750 Watts
  • Advance Timing : 18° Middle PWM: 16 Khz

Contents

  • 1 x Mini Fan evo ducted fan unit + HET 2w16 motor
  • 1 x heat sink
  • PK Plugs
  • English Instructions
  • Reviews
  • No customer reviews for the moment.

    Write a review

    EDF Ducted Fan WEMOTEC Mini Fan evo 65mm (9-blades) + HET 2W-16 4200Kv (CCW)

    EDF Ducted Fan WEMOTEC Mini Fan evo 65mm (9-blades) + HET 2W-16 4200Kv (CCW)

    Combo 65mm / 9 blades / HET 2W16 4200Kv (inrunner) / 3S / 133g
    > 3S (11.1V) : 45A / 920g / 500W

    30 other products in the same category: