EDF Ducted Fan Wemotec Mini Fan evo 70mm (9 blades) + Leopard LBP2860/3D

WEM-MFELEO3400

New product

Wemotec

Combo 70mm / 9 pales / 3400Kv (inrunner) / 5S / 248g
> 5S (18.5V) : 96A / 1.9kg / 1776W

More details

This product is no longer in stock

By buying this product you can collect up to 90 points . Your cart will total 90 points that can be converted into a voucher of US $2.12 .


US $107.18

Instead of US $127.64

Data sheet

Weight (gr): 247 gr
EDF thrust (categorization) 1-2kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 70
Blades: 9
Turbine shroud Synthetic
EDF Rotor Synthetic
No. of Magnet Poles: 4 poles
Turns/min/Volt (Kv): 3400 kv
Motor Type: In-Runner
Motor Diameter (mm): 28
Shaft diameter (mm): 4
Battery Cells: 5s - 18.5v
Connection: PK 3.5mm

More info

EDF Ducted Fan Wemotec Mini Fan evo / Leopard LBP2860/3D

Modern high efficiency multi bladed fan unit. The fan unit comes completely mounted with a Leopard LBP2860/3D. For Lipo 5s, 96A and 1.9kg of thrust.

This Pack, composed with the EDF unit, the motor and the assembling and balancing service, is precisely set, harmonically balanced and tested by us.

Technical specifications

  • Motor: Leopard LBP2860/3D 3400kv
  • EDF: 9-blades Wemotec Mini Fan Evo
  • LiPo : 5s
  • Weight incl. Motor: 248g

Readings

Voltage under load: 5S (18.5 V)

  • Current: 96 A
  • Thrust: 1900g
Readings:  We measure with a constant voltage of 3.7 V / cell. Current and thrust are measured with a small intake lip (r=6 mm) at 21° C, 50m asl and standard pressure. Depending on battery, controller and installation you may see higher or lower figures.The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Content

  • EDF Combo Wemotec Mini Fan evo / Leopard LBP2860/3D 3400kv

Motor technical specifications

Description

  • New design, four-pole rotor,the overall efficiency of more than 90%
  • Extremely low temperature without additional heat sink can meet the vast majority of applications
  • Compared to competitive products,lighter weight,higher torque
  • Use of high-quality materials:aluminum alloy shell fine,high-quality magnetic steel,high temperature wire,imported high-quality bearings
  • Rotor using special materials reinforced,high-speed operation under the non-burst phenomenon
  • Good heat dissipation ,high overload capacity
  • Low electromagnetic interference
  • Minimum required electrical maintenance
  • Long life

Technical specification

  • Model: LBP2860-B/3D 3400Kv
  • Lipo Cell max: 4-5s (17v)
  • KV(RPM/Volt): 3400
  • Resistance: 0.0098
  • No-load Current : 2.5A
  • Diameter×Length (mm): Φ28.0×64
  • Mounting hole depth: 7mm
  • Length of extend Shaft : 12mm
  • Shaft Diameter (mm): Φ4.0
  • Weight: 176g

Mini Fan evo unit Specifications:

  • Material: Nylon, ABS, Aluminium
  • Weight: approx. 57 g (with intake ring + 15g)
  • Power: 500-3.000 W
  • max rpm: 60.000
  • Rotor: 9 blades(68 mm) glass reinforced
  • Kit comprises: all components, english instruction
  • Ageom.: 29,4 qcm
  • Aeff.: 26,2 qcm
  • Thrust: 6-30 N

Thrust tube should be 56 mm in diameter for best performance.
You can find several versions of such tubes in our shop.
  • Reviews
  • No customer reviews for the moment.

    Write a review

    EDF Ducted Fan Wemotec Mini Fan evo 70mm (9 blades) + Leopard LBP2860/3D

    EDF Ducted Fan Wemotec Mini Fan evo 70mm (9 blades) + Leopard LBP2860/3D

    Combo 70mm / 9 pales / 3400Kv (inrunner) / 5S / 248g
    > 5S (18.5V) : 96A / 1.9kg / 1776W

    30 other products in the same category: