Combo 90mm / 7 blades / 1680Kv (inrunner) / 6-8S / 471g
> 6S (22.2V) : 55A / 2.55kg / 1220W
> 7S (21.7V) : 66A / 2.90kg / 1645W
> 8S (29.6V) : 85A / 3.58Kg / 2345W
This product is no longer in stock
Warning: Last items in stock!
Availability date:
By buying this product you can collect up to 249 points . Your cart will total 249 points that can be converted into a voucher of US $5.88 .
Reference: HET-700-68-1680-5
Brand: High End Tech. RC (HET)
Typhoon HET EDF 700-68-1680 Motor 39mm, recommended for 6s to 8s Lipo and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades for 8s Lip, for 9 bladed 90mm JETFAN-90 EDF unit type for 8s and Stumax EDF type 90mm for 6s Lipo.
Reference: VASA-6-05
Brand: Vasa Model
This is an Open Duct inlet lip especially for the use in the Vasafan 90mm and other EDF of same diameter.
![]() |
Carbon Intake Ring for VASAFAN 90mm
US $24.49 |
Weight (gr): | 471g |
EDF thrust (categorization) | 2-3kg, 3-4kg |
Direction of Rotation (EDF Rotor) | Classic Counter Clock Wize (CCW) |
EDF Diameter Class (mm): | 90 |
EDF Outside Diameter (mm): | 91mm |
EDF Inner Diameter (mm) : | 90mm |
Rotor Diameter (mm): | 89mm |
Blades: | 7 |
Stators: | 8 Stators |
Turbine shroud | Carbon |
EDF Rotor | Carbon |
Turns/min/Volt (Kv): | 1680Kv |
Motor Type: | In-Runner |
Motor Diameter (mm): | 39 |
Shaft diameter (mm): | 5 |
Battery Cells: | 6s - 22.2v, 7s - 21.77v, 8s - 29.6v |
Connection: | Delivered without plug |
New all carbon EDF Vasafan-90, including rotor blades, and a HET 700-68-1680Kv brushless motor combo. With this one can get up to a thrust of 3580g with a 8S battery.
The carbon design of the EDF ensures a perfect rigidity and lightness, and, the aluminium engine housing promotes heat dissipation and improves performance.
About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.
The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
NOTE: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.
Typhoon HET EDF 700-68-1680 Motor 39mm, recommended for 6s to 8s Lipo and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades for 8s Lipo. Recommended for 9 bladed 90mm JETFAN-90 EDF unit type for 8s and Stumax EDF type 90mm for 6s Lipo. Also suitable for any 90mm ducted fan units using 39mm motor's diameter.
Note: This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.
Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
WARNING: Screws that are too long can short out the windings resulting in a cooked motor, this is not covered by warranty
No customer reviews for the moment.
Reference: VASA-1-01-4800
Brand: Vasa Model
Combo 50mm / 7 blades / 4800Kv (inrunner) / 2-4S / 73g> 2S (7.0V) : 7.9A/...
Reference: VASA-4-03-2670
Brand: Vasa Model
Combo 70mm / 14 blades / 2670Kv (outrunner) / 4-6S / 255g> 4S (14.4V) :...
Reference: VASA-1000087
Brand: Vasa Model
This is an Open Duct inlet lip especially for the use in the Vasafan 70mm and...
Reference: VASA-6-05
Brand: Vasa Model
This is an Open Duct inlet lip especially for the use in the Vasafan 90mm and...
Reference: VASA-6-03
Brand: Vasa Model
The new EDF VASAFAN-55, including carbon rotor blades, has been specifically...
Reference: VASA-8-07
Brand: Vasa Model
This is an Open Duct inlet lip especially for the use in the Vasafan 120mm...
Reference: VASA-1-01
Brand: Vasa Model
The new all carbon EDF VASAFAN-50, including rotor blades, with an integrated...
Reference: VASA-1-01-6000
Brand: Vasa Model
Combo 50mm / 7 blades / 6000Kv (inrunner) / 2-3S / 73g> 2S (6.6V) : 14.7A...
Reference: VASA-2-01
Brand: Vasa Model
The new all carbon EDF VASAFAN-55, including rotor blades, with an integrated...
Reference: VASA-2-01-4800
Brand: Vasa Model
Combo 55mm / 7 blades / 4800Kv (inrunner) / 2-4S / 74g> 2S (6.9V) : 9.8A /...
Reference: VASA-2-01-6000
Brand: Vasa Model
Combo 55mm / 7 pales / 6000Kv (inrunner) / 2-3S / 74g> 2S (6.3V) : 19.6A /...
Reference: VASA-2-02
Brand: Vasa Model
The new EDF VASAFAN-55, including carbon rotor blades, has been specifically...
Reference: VASA-4-03-2800
Brand: Vasa Model
Combo 70mm / 14 blades / 2800Kv (outrunner) / 4S / 255g> 4S (14.8V) : 57A...
Reference: VASA-5-01
Brand: Vasa Model
The new all carbon EDF VASAFAN-82, including rotor blades, has been...
Reference: VASA-5-01-2250
Brand: Vasa Model
Combo 82mm / 7 blades / 2250Kv (inrunner) / 6S / 450g> 6S (20.6V) : 91A /...
Reference: VASA-1000088
Brand: Vasa Model
This is an Open Duct inlet lip especially for the use in the Vasafan 82mm and...
Reference: VASA-6-01-2100
Brand: Vasa Model
Combo 90mm / 7 pales / 2100Kv (inrunner) / 5-6S / 471g> 5S (18.5V) : 61A /...
Reference: VASA-6-01
Brand: Vasa Model
The new all carbon EDF VASAFAN-90, including rotor blades, has been...
Reference: VASA-7-02
Brand: Vasa Model
The new all carbon EDF VASAFAN-110, including rotor blades, has been...
Reference: VASA-7-02-670
Brand: Vasa Model
Combo 110mm / 14 blades / 670Kv (inrunner) / 12-15S / 735g> 12S (44.5V) :...
Reference: VASA-7-02-780
Brand: Vasa Model
Combo 110mm / 14 pales / 780Kv (inrunner) / 10-12S / 735g> 10S (36.5V) :...
Reference: VASA-7-02-840
Brand: Vasa Model
Combo 110mm / 14 blades / 840Kv (inrunner) / 10-12S / 735g> 10S (33.7V) :...
Reference: VASA-7-07
Brand: Vasa Model
This is an Open Duct inlet lip especially for the use in the Vasafan 110mm...
Reference: VASA-8-02
Brand: Vasa Model
The new all carbon EDF VASAFAN-120, including rotor blades, has been...
Reference: VASA-8-02-590
Brand: Vasa Model
Combo 120mm / 14 blades / 590Kv (inrunner) / 13-15S / 675g> 13S (46.3V) :...
Reference: VASA-8-02-670
Brand: Vasa Model
Combo 120mm / 14 blades / 670Kv (inrunner) / 12-15S / 740g> 12S (43.0V) :...
Reference: VASA-8-02-685
Brand: Vasa Model
Combo 120mm / 14 blades / 685Kv (inrunner) / 12-15S / 664g> 12S (42.7V) :...
Reference: VASA-8-02-780
Brand: Vasa Model
Combo 120mm / 14 blades / 780Kv (inrunner) / 10-12S / 740g> 10S (36.5V) :...
Reference: VASA-2-01-4800
Brand: Vasa Model
Combo 55mm / 7 blades / 4800Kv (inrunner) / 2-4S / 74g> 2S (6.9V) : 9.8A /...