EDF Ducted Fan FD Model 90mm 12 blades + 6S Motor 1450KV

FED-9012-1450

New product

Turbines RC-FD

Combo 90mm / 12 blades / 1450Kv (outrunner) / 6S / 369g
> 6S (22.2V) : 102A / 3090g / 2264W
> 6S (25.2V) : 124A / 3790g / 3125W

More details

Available

By buying this product you can collect up to 74 points . Your cart will total 74 points that can be converted into a voucher of US $1.75 .


US $87.52

Accessories and other versions

Data sheet

Length (mm): 81.1mm (without motor / Cone)
Weight (gr): 369 gr
EDF thrust (categorization) 3-4kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 90
EDF Outside Diameter (mm): 98 mm
EDF Inner Diameter (mm) : 90 mm
Blades: 12
Stators: 7
Turbine shroud Synthetic
EDF Rotor Synthetic
Turns/min/Volt (Kv): 1450
Motor Type: Out-Runner
Motor Diameter (mm): 35
Shaft diameter (mm): 6
Battery Cells: 6s - 22.2v
Connection: PK 4mm

More info

EDF Ducted Fan FD Model 90mm 12 blades + 6S Motor 1450KV

Features

  • Efficiency, robustness, performance and good balance, FD model turbines are offered at an attractive price
  • Big air volume
  • Sound realistic
  • High quality motor : continuous operation, High temperature resistance, wear resistance, stable performance, Highly efficient stable, Smooth operation, Easy heat dissipation
  • Detachable ring

The motor and fan unit comes assembled and balanced from the factory.

Measures

 Description / LiPo    6s (22.2v)    6s (25.2v) 
 Thrust: 3090 g 3790 g
 Current: 102 A 124 A
 Power: 2264 W 3125 W
 Recommended ECS:  125 A 150 A
 Recommended Battery:    6000mAh 35c 6000mAh 35c

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Technical Specifications

  • Motor Kv: 1450 Kv
  • Motor: shaft 6mm 
  • Rotor: 12 blades
  • Internal diameter: 90.2mm
  • External diameter: 98mm
  • External diameter w/lip: 112mm
  • Combo max thrust: 3790g
  • Weight: 369g (combo EDF + lip + motor )
  • Minimum Voltage: 6.5V
  • Minimum Power: 6.5W
  • Recommended max. rotation speed: nc

Content

  • 1x Combo FD Model 6s 90mm EDF
  • 1x Intake Ring
  • PK 4mm connectors

  • Reviews
  • No customer reviews for the moment.

    Write a review

    EDF Ducted Fan FD Model 90mm 12 blades + 6S Motor 1450KV

    EDF Ducted Fan FD Model 90mm 12 blades + 6S Motor 1450KV

    Combo 90mm / 12 blades / 1450Kv (outrunner) / 6S / 369g
    > 6S (22.2V) : 102A / 3090g / 2264W
    > 6S (25.2V) : 124A / 3790g / 3125W

    Download

    FEDI EDF9012 Manual EN

    FEDI Model EDF 90mm 12 blades Instruction Manual

    Download (319.44k)

    11 other products in the same category:

    Customers who bought this product also bought: