HJ Digital Servo Tester - ESC Consistency Tester 4.8v-6v

HJ-SERVTEST

New product

Turbines RC

Can be used to check synchronized output control for up to 4 servos and to compare the performance steering gear control of the servo output signal. Can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes.

More details

Available

By buying this product you can collect up to 14 points . Your cart will total 14 points that can be converted into a voucher of US $0.33 .


US $16.62

More info

Can be used to check synchronized output control for up to 4 servos and to compare the performance steering gear control of the servo output signal. Can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes.
With PPM signal test function in the display the input PPM, signal changes while the input the PPM signal synchronization output to the servo.
 
Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50HZ, rotary potentiometers to decrease or increase the width of the output pulse.

Specifications:

  • Input voltage: DC/5-6V
  • Output signal width  :800-2200us
 
Can be used to check synchronized output control for up to 4 servos and to compare the performance steering gear control of the servo output signal. Can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes.
With PPM signal test function in the display the input PPM, signal changes while the input the PPM signal synchronization output to the servo.
 
Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50HZ, rotary potentiometers to decrease or increase the width of the output pulse.
Button the Select (Note: the key switch function, circulation patterns)
  1. S-1 manual mode (Manual)
  2. S-2-bit mode (Neutral)
  3. S-3 automatic mode (Automatic)
Keys pulse width (Note: button switch function, circulation  patterns)
  1. 50H analog servo signal cycle 20us frequency 50HZ
  2. 125H digital the steering gear a signal cycle 8us frequency 125HZ
  3. 250H Digital Servo signal cycle 4us frequency 250HZ

Warning:  use analog or digital button to select the corresponding servos before you plug the servos to avoid any servo damage

  • Reviews
  • No customer reviews for the moment.

    Write a review

    HJ Digital Servo Tester - ESC Consistency Tester 4.8v-6v

    HJ Digital Servo Tester - ESC Consistency Tester 4.8v-6v

    Can be used to check synchronized output control for up to 4 servos and to compare the performance steering gear control of the servo output signal. Can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes.

    30 other products in the same category:

    Customers who bought this product also bought: