FrSky Tandem X18/X18S MC18 All-CNC Metal Hall Sensor Gimbal with 45° Travel Limiter

FRS-04100256

New product

FrSKY

FrSky Tandem X18/X18S MC18 All-CNC Metal Hall Sensor Gimbal with 45° Travel Limiter

More details

In stock

By buying this product you can collect up to 58 points . Your cart will total 58 points that can be converted into a voucher of US $1.39 .


US $69.90

More info

FrSky Tandem X18/X18S MC18 All-CNC Metal Hall Sensor Gimbal with 45° Travel Limiter

Note: this product requires specific skills for its installation, such as the dismantling of various parts. Make sure you have all the information and skills required before purchasing it.
1. When you first open the back shell, please take EXTREME CARE not to simply pull off the back shell directly, otherwise you risk irreparable damage to either the 900 MHz Antenna cable, the socket on the main RF PCB board it connects too, or both of them, thus rendering the TANDEM feature inoperable.
The rear Shell needs to be VERY carefully separated and great care taken to carefully unclip the 900 MHz Antenna.
2. Before you install the gimbals, pay particular attention to the orientation of the pre installed Gimbals (i.e. which side of each gimbal the Bi-Metallic strip is on for the ratchet adjustment) as fitting the MC18 Gimbals with these Bi-Metallic strips closest to each OUTER edge will create interference problems when you try to reassemble the radio due to the slider mounting screws fouling the Bi-Metallic ratchet strip screws.
 
If you have any reservations about performing this Gimbal upgrade we STRONGLY recommend purchase of the X18S which has the MC 18 installed during the manufacturing process.

Content

  • 1x FrSky Tandem X18/X18S MC18 All-CNC Metal Hall Sensor Gimbal with 45° Travel Limiter

29 other products in the same category: