Ducted Fan EDF Schubeler DS-51-AXI HDS V2015 90mm + HET 650-68-1130 motor

SCH-DS-51-AXI HDS-HET1130

New

This combo Schübeler DS-51-AXI HDS 90mm equiped with the Typhoon HET 650-68-1130 motor generates approx 2.6Kg of thrust / 41A with 8S and 3,7kg of thrust / 63A with 10S.

More details

Available

By buying this product you can collect up to 355 loyalty points. Your cart will total 355 points that can be converted into a voucher of 10,65 €.


355,00 €

Add to wishlist

Accessories

Data sheet

Length (mm): 60
Weight (gr): 407
EDF thrust (categorization) 2-3kg, 3-4kg
EDF Diameter Class (mm): 90
EDF Outside Diameter (mm): 92
EDF Inner Diameter (mm) : 90
Blades: 10
Stators: 3
Turbine shroud Carbon
EDF Rotor Synthetic
Turns/min/Volt (Kv): 1130
Motor Type: In-Runner
Motor Diameter (mm): 36
No. of Magnet Poles: 4
Shaft diameter (mm): 5
Battery Cells: 8s - 29.6v, 10s - 37v

More info

Ducted Fan EDF Schubeler DS-51-AXI HDS 90mm + HET 650-68-1130 motor

This combo Schübeler DS-51-AXI HDS 90mm equiped with the Typhoon HET 650-68-1130 motor generates approx 2.6Kg of thrust / 41A with 8S and 3,7kg of thrust / 63A with 10S.

 Caracteristiques / LiPo  8S 10S
 Voltage 29.6V 37v
 Current 41A  63A
 Power 1210W 2330W
 Thrust 2.6kg 3.7kg
 Controler >=50 / HV >=80A / HV
 Recommended Battery    >= 3000mAh 35C  >= 4000mAh 35C 
The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.
Note: The "Secure Fan Fix" system visible on some pictures is not included. Please refer to the "accessories" section on this page for the available options.
Note: Given performances have been measured with a fan equiped with an intake lip. Please refer to the "accessories" section on this page for the available options.

About the Schübeler DS-51-AXI HDS 90mm fan

Specifications:

  • DS-51-AXI HDS (90mm) 
  • max rpm: 45.000
  • max power: 4270 W
  • max static thrust: 55 N equivalent to around 5.6kg
  • max efflux velocity: 95.6 m/s
  • weight: 107 g
  • motor diameter: 36-39 mm
  • for 5mm shaft diameter

Some measurements examples:

  • Typhoon HET 700-68-2100kv Motor / 5S / 100A / Thrust 3,2kg
  • Typhoon HET 650-68-1600kv  Motor / 6S / 68A / Thrust 2,8kg
  • Typhoon HET 700-68-2100kv Motor / 6S / 135A / Thrust 4,3kg
  • Typhoon HET 700-68-1200kv Motor / 8S / 54A / Thrust 3kg
  • Typhoon HET 650-68-1130kv Motor  / 10S / 62A / Thrust 3,8kg
  • Typhoon HET 700-68-1200kv Motor / 10S / 78A / Thrust 4,3k

About the Thyphoon HET 650-68-1130 motor

The 650 Series from HET are designed around the hugely successful 700 series construction but in a smaller case size to suit fans that take 36mm motors. Typhoon HET EDF 650-68-1130 Motor 36mm, recommended for 6 to 8s configuration. Suitable for 90mm HET EDF unit 9305 and WeMotec Midi Fan pro and evo or Schubeler DS-51-AXI HDS.

Description

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

Specifications

  • Diameter : 36 mm 
  • Length : 67.5 mm
  • Shaft Dia. : 5 mm 
  • Weight : 300 grams 
  • Internal resistance: 22.5
  • No load current (lo): 1.3 
  • Max efficiency: 88% 
  • Poles : 4 
  • No load KV : 1130
  • Suggested lipo cells. : 12S 
  • Max amps: 75A (12S)
  • Power Nominal: 2800 watts
  • Thrust: 3.3kgs (37V) / 4.6 kgs (44.4V)
  • Recommended advance timing : low
  • Specially designed for 9305 and Midi fan units
  • Includes Aluminum Heat Sink and tools
Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.


Reviews

Write a review

Ducted Fan EDF Schubeler DS-51-AXI HDS V2015 90mm + HET 650-68-1130 motor

Ducted Fan EDF Schubeler DS-51-AXI HDS V2015 90mm + HET 650-68-1130 motor

This combo Schübeler DS-51-AXI HDS 90mm equiped with the Typhoon HET 650-68-1130 motor generates approx 2.6Kg of thrust / 41A with 8S and 3,7kg of thrust / 63A with 10S.

Write a review

30 other products in the same category:

Download

Pack content