• Combo configurator

  • Horus RC Europe New Official Store

  • High End Technology RC (HET) Official Store

  • Kolibri

  • Freewing Kits

  • JP Hobby Landing Gears List

  • Mini Series

  • Arrows RC

  • Scratch and dents

Viewed products


Purchase a gift voucher

Create quotation from my cart Request a quotation

Schubeler DS-82 HST V2016 120mm Carbon EDF Ducted Fan + DSM 6036-600Kv Motor


New product


Schubeler DS-82 HST 120mm Carbon EDF Ducted Fan + DSM6036-600Kv Motor. For 12 to 14s LiPo, thrust 7.2 to 9.27kg.

More details

Available on order

By buying this product you can collect up to 1182 points . Your cart will total 1182 points that can be converted into a voucher of US $28.37 .

US $1,419.00

Accessories and other versions

Data sheet

EDF thrust (categorization) 6-8kg, 8-10kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 120
Turbine shroud Carbon
EDF Rotor Carbon
Turns/min/Volt (Kv): 600 Kv
Battery Cells: 12s - 44.4v, 14s - 51.8v

More info

Schubeler DS-82 HST V2016 120mm Carbon EDF Ducted Fan + DSM 6036-600Kv Motor 

Schubeler DS-82 HST 120mm Carbon EDF Ducted Fan + DSM6036-600Kv Motor. For 12 to 14s LiPo, thrust 7.2 to 9.27kg.

This new combo is a replacement for the DS-77-DIA HST + DSM6740-650Kv

The 120mm fan for high static thrust

With the DS-77-DIA HST Schuebeler offers a completely new jet propulsion system. The system is based on a new 12-blade axial compressor wheel which is driven by the all new Schuebeler electronic commutated motor.

The 120mm axial compressor generates a surpassing compression ratio and can therefore be integrated much more efficiently in huge jet models than classic ducted fans. The rotational speed level is only 28,000rpm at an impressive exhaust speed of 102m/s and a thrust of 9,7kg. This high thrust impulse is therefore generated by a high exhaust speed and a high inner efficiency of the axial fan stage. In figures that means you can integrate this fan in jets up to 11kg and an exhaust diameter of just 99mm. The design of the 12-blade axial compressor wheel is based on speed ratios which are similar to the ratios of a full scale turbofan. That results besides a high efficiency in a perfect optical scale appearence and a sound which can only be compared to full scale jet engines. A silent whispering and fizzling of the axial compressor at idle rpm is predominated by an impressive jetstream noise coming from the exhaust at full throttle.

An extraordinary challenge was the development of an electronic commuted DC motor that perfectly fits to the axial fan. The 12-blade compressor demands an impressive torque of 2,2Nm at 28,000rpm which can only be generated by a high torque motor of high diameter and shorter length. Consequently the new DSM 6740 Schuebeler motor has a diameter of 67mm and a magnet length of 40mm. This motor is fully integrated in the axialfan to assign a huge area for the main airflow. In addition to that the motor is perfectly.

Cooled and needs no efficiency decreasing internal ventilator. The motor is based on a two pole design to allow a flexible fit of the motor characteristics to the needs of the axial fan. Nevertheless the windings sit in a 12 slot stator to increase the torque and to avoid any winding deformation at high temperatures. The magnet is attached to a sheeted magnet holder and reinforced by a bandage made of IMS carbon fibre which allows a high rpm tolerance. The whole motor design was optimized in respect of excessive heat tolerance and of course a high efficiency even at high currents.

The mechanical design of the Schuebeler DSM 6740 motor is based on established mechanical engineering and distinguishes itself by a shaft mount consisting of a fixed bearing and a prestressed floating bearing. Front- and endbell are fixed by 8 countersunk head screws, all surfaces are protected by hard anodizing. The result is a very high durability in combination with a low mechanical soundscape which allows the whispering of the axial fan to predominate even at idle rpm.

The conjunction between motor and axial fan is made by 4 handmade carbon stators which also guide the 3 motor phases through the UHM carbon sandwich shroud. The conversion of shaftpower to streampower is accomplished by 12 handmade carbon rotor blades which sit form-closed in precision aluminium swivels.

  • A perfect match of fan and motor design
  • Brand new motor design meets the high torque requirements of the 12 bladed rotor
  • Highest efficiency (fan-motor-controller) notwithstanding the high torque concept
  • Long flying times plus high power input without damages or overheating
  • 12 bladed rotor for lower rpm and high flow deflection
  • CFRP-Aluminium design with ultrathin rotorblades
  • High modulus carbon fibre shroud - perfect true running due to collet rotor mount
  • 3-phase wiring comfortably attached at the fan shroud

HST Schubeler EDF serie units are real jewels! All units are precisely and carefuly hand made by Schubeler "craftmen / techniciens". Motors are only installed by Schubeler in their factory. All parts are carefuly checked and all rotating parts tested and balanced dynamicaly.
Delivery time : HST units are made on demand and manufacturing delay, usually 4 to 5 weeks, may vary depending upon period. Please contact us.
Notes : The "Secure Fan Fix" system visible on some pictures is sold separately. Combos including the ESC, adjusted and wired are available. Intake lips are also available. A "nacelle" version can be provided on-demand.

Technical Data

  • Inner shroud diameter: 120mm
  • Fan swept area: 82cm²
  • Weight incl. motor, wires, connectors and
  • Secure Fan Fix: 1240g
  • Thrust range: 7.24kg to 9.27kg (71-91N)
  • Exhaust speed range: 87-98m/s
  • RPM range: 24.000-28.500rpm
  • Input power: 4,2-6,2kW
  • Allowed battery: 12-14S 9000mAh
  • Overall efficiency: 71-72%


No customer reviews for the moment.

Write a review

Schubeler DS-82 HST V2016 120mm Carbon EDF Ducted Fan + DSM 6036-600Kv Motor

Schubeler DS-82 HST V2016 120mm Carbon EDF Ducted Fan + DSM 6036-600Kv Motor

Schubeler DS-82 HST 120mm Carbon EDF Ducted Fan + DSM6036-600Kv Motor. For 12 to 14s LiPo, thrust 7.2 to 9.27kg.

30 other products in the same category: