Hobbywing Multifunction LCD Program Box G2 for Platinum, Xerun, Ezrun ESC

HBW-HW30502001

New product

Hobbywing

This Multifunction program box is used to program the brushless ESC as an independant device, or a USB linker to program or to update ESC firmware or can also be used as a LiPo battery digital voltmeter. It has friendly user interface and easy to use. Suitable for: PLATINUM ESC for planes/helicopters, Xerun & Ezrun series ESC for cars, Seaking Pro series ESC for boats.

More details

Available

By buying this product you can collect up to 28 points . Your cart will total 28 points that can be converted into a voucher of US $0.66 .


US $33.34

More info

Hobbywing Multifunction LCD Program Box V2 for Platinum, Xerun, Ezrun ESC

This Multifunction program box is used to program the brushless ESC as an independant device, or a USB linker to program or to update ESC firmware or can also be used as a LiPo battery digital voltmeter. It has friendly user interface and easy to use. Suitable for: PLATINUM ESC for planes/helicopters, Xerun & Ezrun series ESC for cars, Seaking Pro series ESC for boats.

This Multifunction LCD Program Box is suitable for the following ESC:

  • PLATINUM series helicopter/aircraft ESC
  • XERUN & EZRUN series Car ESC (Version 2.0 and 2.1)
  • XERUN-120A V3 & V3.1 ESC

Working Modes

  • Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen. 
  • Works as an USB adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC by HOBBYWING USB LINK SOFTWARE .
  • Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell.

Specifications

  • Size: 90mm (L) * 51mm (W) * 17mm (H)
  • Weight: 65g 
  • Input Voltage: 4.5-12.6V
  • Displayer: 16*2 characters LCD.
  • Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)

Programmable items for the XERUN and EZRUN series car ESC

  • Running Mode 
  • Drag Brake Force 
  • Low Voltage Cut-Off Threshold 
  • Start Mode 
  • Maximum Brake Force 
  • Maximum Reverse Force 
  • Initial Brake Force 
  • Throttle Neutral Range 
  • Timing 
  • Over-Heat Protection 
  • Motor Rotation 
  • Lipo Cells Amount
Note: Some speed controllers have less programmable items, but some have more. Please read the user manual of your speed controller to get detail information.

Programmable items for the PLATINUM series airplane ESC

  • Brake 
  • Battery Type 
  • Low Voltage Protection Mode (Cutoff Mode) 
  • Low Voltage Protection Threshold (Cutoff Threshold) 
  • Start Mode 
  • Timing 
  • Governor Mode 
  • Reserved Item #1
  • PWM Frequency 
  • Built-In BEC Output 
  • Reserved Item #2
  • Lipo Cells Amount 
Note : If the ESC hasn’t built-in BEC, you need to use an additional battery to supply the program box.
  • Reviews
  • No customer reviews for the moment.

    Write a review

    Hobbywing Multifunction LCD Program Box G2 for Platinum, Xerun, Ezrun ESC

    Hobbywing Multifunction LCD Program Box G2 for Platinum, Xerun, Ezrun ESC

    This Multifunction program box is used to program the brushless ESC as an independant device, or a USB linker to program or to update ESC firmware or can also be used as a LiPo battery digital voltmeter. It has friendly user interface and easy to use. Suitable for: PLATINUM ESC for planes/helicopters, Xerun & Ezrun series ESC for cars, Seaking Pro series ESC for boats.

    19 other products in the same category:

    Customers who bought this product also bought: