Wemotec Glider Nacelle for Mini Fan evo 70mm

Wemotec Glider Nacelle for Mini Fan evo 70mm

Wemotec fixed nacelles allow you to equip your glider with a simpler material than the retractable versions while taking advantage of the propulsion of a turbine.

The nacelle is in white gelcoated fiberglass. It is equipped with an intake lip and an outlet duct. The height of the support stand can be adjusted to your liking. The position of the nacelle must be as close as possible to the fuselage of your glider in order to obtain a low lever force. This must be in the flight axis of the glider and aligned parallel to the tail (right).

Attention: The Wemotec nacelle is designed only for the Wemotec Mini Fan evo EDF.

Choice and calculation of the weight / thrust ratio:

• 0.5: 1 is ideal for slope flight.
• 0.6: 1 is required for a glider to take off from a grass runway and gain altitude.
• 0.7: 1 is required for aerobatics.

When calculating the total weight of the model, the installed battery, as a rule, replaces the lead installed in the nose.

If you want to paint the nacelle, you must roughen the white gelcoat at grain 800 with water (In order to remove the release agent), then apply the paint at your convenience

 Description

• Length with lip: 143mm
• Internal diameter: 69mm
• Max. External diameter: 82mm
• Duct Outlet diameter: 56mm
• Weight: 120g
• Support Length: 200mm (can be shortened if necessary)
• Support dimensions  75 x 23mm (profiled)

Content

• 1x nacelle
• 1x intake lip
• 1x outlet duct