> >>>EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW)
EDF Ducted Fan JP Hobby 105mm + 8s Motor 1150KV View larger
Previous Next

EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW)

JPH-EDF105-12S-CW

New product

JP Hobby

For Twin EDF Jet - Counter Rotative CW version - Also suitable for single EDF Jet
Combo 105mm / 12 blade / 875KV (outrunner) / 12S / 550g
> 12S (44.4V) : 114 A / 6.5 kg / 4528 W
> 12S (48.0V) : 130 A / 7.5 kg / 5280 W

More details

Available

By buying this product you can collect up to 382 points . Your cart will total 382 points that can be converted into a voucher of US $9.02 .


US $451.35

Accessories and other versions

Must have accessories and options

BRUSHLESS CONTROLLER:

JP Hobby 160A ESC 6-14S (OPTO) JP Hobby 160A ESC 6-14S (OPTO)
US $264.52 US $251.29
ZTW Mantis G2 160A HV ESC 6-14S OPTO ZTW Mantis G2 160A HV ESC 6-14S OPTO
US $181.82

Data sheet

Length (mm): 80mm (without motor / Cone)
Weight (gr): 550 gr (with motor)
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 105
EDF Outside Diameter (mm): 107 mm
EDF Inner Diameter (mm) : 105 mm
Exit Air Diameter (EDF): 105 mm
Rotor Diameter (mm): 104.5 mm
Blades: 12
Stators: 8
Turbine shroud Metal
EDF Rotor Metal
Power System MT-4250-12S
No. of Magnet Poles: 12
Turns/min/Volt (Kv): 840 Kv
Motor Type: Out-Runner
Motor Diameter (mm): 50 mm
Shaft diameter (mm): 8
Battery Cells: 12s - 44.4v
Connection: PK 5.5mm

More info

EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW) - For Twin EDF Jet - Counter Rotative CW version - Also suitable for single EDF Jet

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

  • Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
  • The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
  • The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
  • Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
  • Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
  • You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.


Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

 Description / LiPo    12s (44.4v)    12s (48.0v)   
 Thrust: 6.5 kg    7.5 kg  
 Current: 114 A 130 A
 Power: 4528 W 5280 W
 Recommended ESC:    130 A / HV  150 A / HV 
 Recommended battery:    5000mAh 40C    5000mAh 40C  
The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Additional measurements with 12s (50.1v):

  • 1kg : 9A
  • 2kg : 21A
  • 3kg : 35A

Specifications

  • Special high grade aluminum quality
  • Motor Kv: 875
  • Motor: MT-4250-12S (6mm axle) Outrunner 12 poles
  • Motor diameter: 42mm
  • Motor length: 50mm
  • Rotor: 105mm 12 blades aluminium
  • External diameter: 107mm
  • Internal diameter: 105mm
  • Inlet ring diameter: 123mm (removable)
  • Ejection diameter: 105 mm
  • Combo max thrust: 7.5Kg
  • Weight: 550g (combo EDF + lip + motor )
  • Max efficiency: 90 %
  • Recommended max. rotation speed: 75600
  • Speed Control Advanced Timing Setting: 15° and under
  • Connections: Banana / PK 5.5mm (in place)

Content

  • 1x JP Hobby 12s 105mm full metal EDF unit CW
  • Reviews

    • No customer reviews for the moment.

    Write a review

    EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW)

    EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW)

    For Twin EDF Jet - Counter Rotative CW version - Also suitable for single EDF Jet
    Combo 105mm / 12 blade / 875KV (outrunner) / 12S / 550g
    > 12S (44.4V) : 114 A / 6.5 kg / 4528 W
    > 12S (48.0V) : 130 A / 7.5 kg / 5280 W

    30 other products in the same category:

    Customers who bought this product also bought:

    My account

    Information

    © Copyright 2024 TURBINES RC. All Rights Reserved.

    Newsletter

    Follow us

    This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

    More information Customize cookies

    Cookie preferences
    Consent

    Functional cookies
    No
    Yes
    Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
    Cookie Provider Purpose Expiry
    PHP_SESSID www.turbines-rc.com The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. Session
    PrestaShop-# www.turbines-rc.com This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. 480 hours
    Analytics cookies
    No
    Yes
    Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.
    Cookie Provider Purpose Expiry
    _ga Google Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 2 years
    _gat Google Used by Google Analytics to throttle request rate 1 day
    _gat_gtag_UA_# Google Used to throttle request rate. 1 minute
    _gd# Google This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser. Session
    _gid Google Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 1 day