E-Flite UMX Me 262 2x30mm EDF Jet BNF (Basic with AS3X and SAFE Select)

Telemetry Capable

The UMX Me 262 is equipped with a control unit/flight controller that includes an ESC and Spektrum receiver that provides real-time flight battery voltage and other telemetry to compatible Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/G3 and 8 G2, the DX9, NX6 to 20, the iX12 to 20, and others) while you fly.

Higher Performance

The factory-installed twin brushless power systems feature 30mm fans with powerful 3S-compatible outrunner motors. This power system setup delivers higher performance than the 28mm fans and 2S-compatible motors installed in previous UMX EDF models to offer unmatched speed and vertical performance, plus longer than average EDF flight times, when using the recommended 600-850mAh 30+C LiPo batteries with an IC2 connector.

Fully Assembled

The UMX Me 262 arrives 100% factory-assembled and ready to fly right out of the box! It's equipped with industry-leading Spektrum 2.4GHz technology that binds to your 5+ channel DSMX/DSM2 equipped transmitter so you could be flying within minutes of opening the box.

Scale Features

The fully molded airframe features a scale outline with a variety of details including gun ports, a clear canopy with pilot figure, and other scale finishes you'd typically expect to find on larger models.

Gear Options

You can use the included fixed landing gear - with a steerable nose wheel and simulated gear doors/strut covers - to taxi, take off from and land on smooth surfaces. Or you can leave the landing gear off for more speed and vertical performance plus easy hand launches over and landings on grass while utilizing the automatic Hand Launch Assist Mode.

Factory Finished

The factory-applied and fully-painted with decal finish not only looks great but also replicates one of the most unique and complex “camo” trim schemes.

Lightweight Design

Construction with composite-reinforced EPS material delivers a lightweight yet durable airframe that's also easily repairable with odorless/foam-safe CA, Foam 2 Foam, epoxy, and other foam-friendly adhesives. Or, in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement/spare parts is readily available.

Bind-N-Fly Completion Level Advantage

Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly!

This Bind-N-Fly Basic model is equipped with a Spektrum 2.4GHz DSMX® receiver featuring AS3X (Artificial Stabilization–3-aXis) technology that works behind the scenes to smooth out the effects of wind and turbulence. The result is a heightened sense of stability and precision that makes you feel like you're flying a much larger, expertly tuned aircraft.

If this is your first model of its type, or you want an extra margin of safety while familiarizing yourself with the airplane, you can enable the optional-use SAFE® Select flight envelope protection technology built into the receiver. No programming is required. Simply change up the binding sequence as directed in the manual.

With SAFE Select enabled, you get:

Pitch and Bank Angle Limits

• These envelope limits keep the airplane from rolling or pitching upside down. They also prevent excessive climb or dive angles.

Automatic Self-Leveling

• The airplane instantly returns to and holds level flight when the sticks are released and in the center position. It's also helpful for keeping the wings level during takeoffs/launches and landings.

Easy Switch Assignment—No Complex Programming Required

• The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any complex programming and takes just a few seconds.

If you don't want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X receiver.