RBC Kits TS11 Iskra Jet EDF 100mm (Wood Kit CNC)

RBC-TS1ER3EC89

New product

RBC Kits

Turbines RC is pleased to introduce the new RBC range of high-quality all-wood kits to assemble yourself.

More details

Available on order

By buying this product you can collect up to 244 points . Your cart will total 244 points that can be converted into a voucher of US $5.76 .


US $288.12

Data sheet

Type of kit: Wood kit
Wingspan (mm): 1650mm
Length (mm): 1798mm
Flying weight (gr) 5000
Wing Surface Area: 47,5 dm²
CG (Center of Gravity) Check manual
Servos 13gr
EDF Diameter Class (mm): 100
Battery Cells: 8s - 29.6v
Battery Capacity (mAh) 5.000 mAh
Surfaces Ailerons, Elevator, Flaps
Material Balsa, Wood, Plastic
Required Radio Minimum 8 channels

More info

RBC Kits TS11 Iskra Jet EDF 100mm (Wood Kit CNC)

Turbines RC is pleased to introduce the new RBC range of high-quality all-wood kits to assemble yourself. All CTP and Balsa parts are CNC cut. This model, once mounted, remains in one piece for easy transport.

The Iskra is easy to drive, but not for beginners or novice builders.
The Iskra requires a lot of work, but it is very rewarding.

RBC jets are made for standard combos (motor + EDF) available on our website.

Technical specifications

  • All Formers And Ribs CNC Cut
  • Unique Tab Lock Design

Features

  • Wing Area: 47,5dm²
  • Wing Span: 1650mm
  • Length: 1798mm
  • Flight Weight: starts at 5000grams
  • Functions: 6 channels
    • Ailerons
    • Elevator
    • Throttle
    • Retracts
    • Flaps
    • Nosewheel steering
    • Rudder 
  • EDF: Wemotec Midi Fan evo 100mm with HETrc edf 700-68-1400 (not included)

Includes 

  • TS11 Iskra 100mm wood kit (to be assemble)
  • Download photos and instructions
  • Full Size Rolled Cad Plans With All Parts Shown
  • Vacuformed Canopy
  • Canopy, nose, wingtips, ducts, paper inlet and outlet ducts, all vacuum-formed
  • All the wood and sheets to make the Iskra: 6 sheets of balsa 14 sheets of lightweight plywood and spruce and balsa stringers
  • 248 CNC-cut pieces of plywood and balsa There are no accessories in the Iskra, such as hinges and horns etc.

Requires

  • 8 Channel Radio
  • 8-channel receiver
  • Turbine: Wemotec midi fan evo 100mm with HETrc edf 700-68-1400 (not included)
  • Motor: HETrc edf 700-68-1400
  • Servos : Approximately 13 grams MG. The flaps should be stronger (30 grams).
  • Controller
  • Battery: 8S 5000 mAh or 2 4S packs
  • Thick and liquid Cyano glue
  • Small parts, screws, etc. are not included in the kit; a parts list is included.

Hardcore building , you like it , all wood cnc cut perfect fit

All of the fuselage is strip sheeted light and very strong

Tail is build on build moulds

Ready for stick on wings

Wings classic build vacuum formed wingtips, wings stick on with hardwood stick swings classic build vacuum formed wingtips, wings stick on with hardwood sticks.

Almost

Retracts straight forward 

We used push pull steering with some braided wire

Canopy simple seats but with 3d printed items it can be made really nice.

3D printed pitots all in the download 

We did make a drop in fan construction , files are in the download for 2 types

  • Reviews
  • No customer reviews for the moment.

    Write a review

    RBC Kits TS11 Iskra Jet EDF 100mm (Wood Kit CNC)

    RBC Kits TS11 Iskra Jet EDF 100mm (Wood Kit CNC)

    Turbines RC is pleased to introduce the new RBC range of high-quality all-wood kits to assemble yourself.

    30 other products in the same category: