Combo with JP Hobby 90mm full metal EDF with 6s 1750kv motor and ESC - Sebart fiberglass mini Albatros L-39 Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.
Available on order
Warning: Last items in stock!
Availability date:
By buying this product you can collect up to 1082 points . Your cart will total 1082 points that can be converted into a voucher of US $25.97 .
Reference: A2P-S03878565
Brand: Sky RC
Pro-Tronik PTK 5A HV 2-12S UBEC. Very compact, very powerful, this accessory is the perfect complement to any Opto Brushless controllers. The UBEC is a new generation accessory that enables to safely feed the reception of a model from the drive battery, regardless of its voltage up to 42v (12s).
Reference: A2P-Z03L9500360
Brand: A2Pro
Lipo 6s 5000 mAh 45C A2Pro Black Lithium XT60
Reference: JPH-EDF90-6S-CCW
Brand: JP Hobby
Combo 90mm / 12 pales / 1750Kv (outrunner) / 6S / 459g> 6S (22.2V) : 103A / 3.57kg / 2286W> 6S (24.0V) : 117A / 4.01kg / 2808W> 6S (25.2V) : 126A / 4.32kg / 3175W
Reference: JPH-ESC-150
Brand: JP Hobby
The JP Hobby 150 Amp Brushless Electronic Speed Controller is using a firmware specificaly designated to be used with JP Hobby pole counts motors. A High Power 12S capable system for RC Airplanes and Helicopters.
Reference: JPH-ER-005-5mmLLL(III)
Brand: JP Hobby
Electric Retract ER-005 5mm (3 retracts whose 1 front)> Model Weight: until 6kg (possible 7-8kg)> Struts diameter: 10mm - Pin Diameter Size: 5mm> Angle: 3x 90 degrees> Rotation direction: 3x Inside (jack side)> Mounting: 3x Low
Reference: SEB-140-12 set
Brand: Sebart
Set 7 Servos 17g + Cables Extensions for SebArt Mini series
Type of kit: | PNP |
Wingspan (mm): | 1215mm / 47.83in |
Length (mm): | 1460mm / 57.48in |
Flying weight (gr) | env. 3,88kg / 8.55lb (with Lipo 5800mAh 6s) |
Wing Surface Area: | 31dm² / 480 sq in |
CG (Center of Gravity) | Check manual |
Servos | 7x sub micro servos |
Direction of Rotation (EDF Rotor) | Classic Counter Clock Wize (CCW) |
EDF Diameter Class (mm): | 90 |
Blades: | 12 |
Turbine shroud | Metal |
EDF Rotor | Metal |
Turns/min/Volt (Kv): | 1750 Kv |
Motor Type: | Out-Runner |
Electronic Speed Control | 150A HV + Ubec 5A |
Battery Cells: | 6s - 22.2v |
Battery Capacity (mAh) | 5000-5.800 mAh |
Surfaces | Ailerons, Rudder, Elevator, Flaps |
Landing Gear | Retractable |
Material | Fiberglass, Carbon reinforcements, Wood |
Build time | 3 hours |
Required Radio | 6 channels minimum |
Recommended pilot skill level | Intermediate, Advanced |
The provisional photos of this product sheet do not show the interior of the cockpit nor the decals not placed on the fuselage but delivered with the model.
Sebart fiberglass mini Albatros L-39 Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories.
The Mini Albatros L-39 ARF Jet was designed by the Italian aerobatic champion, Sebastiano Silvestri. This sport jet model design is enhanced by adding the ultimate aerodynamics principals of the modern FAI pattern models and using the 15 years experience in flying jets of Sebart.... the result is outstanding!
This innovative design combined with a lightweight structure, the full composite fiberglass fuselage and all wood airframe wings and stabs, give the Mini Albatros L-39 new levels of precision and smoothness at any airspeed and flight conditions.
Note: The factory-installed electric retracts, nose gear door servos and steering servo can NOT be powered by more than 6.0V. If you intend to use HV servos for the control surfaces and use a 2S 7.4V LiPo pack, a voltage regulator will be required to prevent damage to the sequencer.
100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 6s.
The motor and fan unit comes assembled and balanced from the factory.
Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.
About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.
Description / LiPo | 6s (22.2v) | 6s (24.0v) | 6s (25.2v) |
Thrust: | 3.57 kg | 4.01 kg | 4.32 kg |
Current: | 103 A | 117 A | 126 A |
Power: | 2286 W | 2808 W | 3175 W |
Recommended ESC: | 120 A / LV | 150 A / LV | 150 A / LV |
Recommended battery: | 3500mAh 40C | 3500mAh 40C | 3500mAh 40C |
The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
No customer reviews for the moment.
Reference: XAN-BSB-05-1
Brand: Xane-RC
Equipped with a 50mm turbine, an Outrunner KV4300 brushless motor and a 20A...
Reference: XAN-BSB-19-01
Brand: Xane-RC
Equipped with a 50mm turbine, an Outrunner 4900Kv brushless motor and a 30A...
Reference: XAN-BSB-19-02
Brand: Xane-RC
Equipped with a 50mm turbine, an Outrunner 4900Kv brushless motor and a 30A...
Reference: XAN-BSB-20G
Brand: Xane-RC
Equipped with an Outrunner 2830-KV1200 brushless motor and a Hobbywing 30A...
Reference: XAN-BSB-20R
Brand: Xane-RC
Equipped with an Outrunner 2830-KV1200 brushless motor and a Hobbywing 30A...
Reference: XAN-BSB-20Y
Brand: Xane-RC
Equipped with an Outrunner 2830-KV1200 brushless motor and a Hobbywing 30A...
Reference: HAG-IMPAKIT
Brand: Turbines RC
Hager CNC Impala Jet EDF 0,88m (CNC wood kit). Faster than the Funjet!
Reference: HAG-IMPRKIT
Brand: Turbines RC
Hager CNC Impressivo 0,88m (CNC wood kit). Faster than the Funjet!
Reference: HAG-IMPRMASSKIT
Brand: Turbines RC
Hager CNC Impressivo Massimo 1,15m (CNC wood kit). A larger and faster...
Reference: SAKR84
Brand: Sab Avio
The SAB model is the semi-scale 1/8 of the KR84 TORTUGA Robodrone version
Reference: XF-XF104P
Brand: X-Fly
The new XFly A-10 Thunderbolt II is a scale replica of this iconic U.S. Air...
Reference: XF-XF109P-F
Brand: X-Fly
The XFly Su-27 Twin 50mm EDF jet is a scale replica of Sukhoi fighter that...
Reference: XF-XF109P-C
Brand: X-Fly
The XFly Su-27 Twin 50mm EDF jet is a scale replica of Sukhoi fighter that...
Reference: FLF-K8-4S
Brand: FlyFans
Pre-order: Pay 15% now - The Flyfans K8 features a powerful 64mm 12-blade...
Reference: FLF-K8-6S
Brand: FlyFans
Pre-order: Pay 15% now - The Flyfans K8 features a powerful 64mm 12-blade...
Reference: XF-XF103P
Brand: X-Fly
The XFly Model T-7A Red Hawk 64mm EDF jet is an easy-to-fly and versatile...
Reference: FRW-FJ10411P
Brand: Freewing
The Freewing Stinger 64 is one of the best values in RC EDF jets. It has good...
Reference: LXM-LX-08003B
Brand: Lanxiang
Hobbywing ESC and metal digital servos - Sky Flight Hobby F-117 Nighthawk...
Reference: LXM-LX-08003
Brand: Lanxiang
Hobbywing ESC and metal digital servos - Sky Flight Hobby SR-71 2x 64mm Jet PNP
Reference: FLF-MIG25G
Brand: FlyFans
Equipped with twin 64mm 12-blade EDF and two 40A controllers, the Mig-25...
Reference: FLF-MIG25ARFG
Brand: FlyFans
The ARF+ version contains the complete model with servos, metal landing gear,...
Reference: FLF-MIG25V
Brand: FlyFans
Equipped with twin 64mm 12-blade EDF and two 40A controllers, the Mig-25...
Reference: FLF-MIG25ARFV
Brand: FlyFans
The ARF+ version contains the complete model with servos, metal landing gear,...
Reference: RBC-MIG29
Brand: RBC Kits
Turbines RC is pleased to introduce the new RBC range of high-quality...
Reference: RBC-F20
Brand: RBC Kits
Turbines RC is pleased to introduce the new RBC range of high-quality...
Reference: RBC-F35C-70
Brand: RBC Kits
Turbines RC is pleased to introduce the new RBC range of high-quality...
Reference: RBC-F100
Brand: RBC Kits
Turbines RC is pleased to introduce the new RBC range of high-quality...
Reference: RBC-A4
Brand: RBC Kits
Turbines RC is pleased to introduce the new RBC range of high-quality...
Reference: RBC-P80
Brand: RBC Kits
Turbines RC is pleased to introduce the new RBC range of high-quality...
Reference: RBC-YAK23
Brand: RBC Kits
Turbines RC is pleased to introduce the new RBC range of high-quality...