• Combo configurator

  • High End Technology RC (HET) Official Store

  • Kolibri

  • Freewing Kits

  • JP Hobby Landing Gears List

  • Mini Series

  • Arrows RC

  • Scratch and dents



Viewed products


Purchase a gift voucher

Create quotation from my cart Request a quotation

SAB Avio KR84 TORTUGA Antartica Robodrone ARF


New product

Sab Avio

The SAB model is the semi-scale 1/8 of the KR84 TORTUGA Robodrone version

More details


By buying this product you can collect up to 290 points . Your cart will total 290 points that can be converted into a voucher of $6.96 .


Data sheet

Type of kit: ARF
Wingspan (mm): 840mm / 33.07in
Length (mm): 810mm / 31.89in
Weight (gr): 1.5kg / 52.91oz
CG (Center of Gravity) Check manual
Battery Capacity (mAh) 2600-3200mAh
Surfaces Elevons, Canards
Landing Gear None - belly lander
Material Fiberglass
Build time 2 heures
Required Radio 4 channels minimum
Recommended pilot skill level Advanced, Expert

More info

SAB Avio KR84 TORTUGA Antartica Robodrone ARF

The SAB model is the semi-scale 1/8 of the KR84 TORTUGA Robodrone version. Ducks at the front of the fuselage provide sufficient rudder pressure even in slow flight. This super rigid model is ready for high speeds for more fun in the sky !

A functional rudder kit upgrade is available as an option for this model.

Warning ! This model is very fast and requires advanced control of driving. Moreover, the position of its propeller located at the rear of the fuselage and its high rotational speed requires extreme caution when launched by hand. Touching the arm or hand with a rotating propeller can cause serious injury. Starting the engine as soon as you let go of the model (be careful of the torque effect during start-up) avoids the risk. Funjet Multiplex users are already used to KR84 Tortuga launching methods. Using a catapult system is another advised safe method. (a dedicated hook for this purpose is delivered with the kit)


  • Painted fiberglass fuselage / Airex fuselage (made under vacuum)
  • All parts and horns are already painted
  • Launch hook if necessary
  • Super-fast assembly

Technical specifications

  • Wing Span: 840mm / 33.07in
  • Length: 810mm / 31.89in
  • Weight: 1.5kg / 52.91oz
  • Flying weight : max. 1.7kg / 59.96oz


  • Horns and servo holders
  • Screws and bolts
  • Linkages (all you need)
  • Manual in English


  • Motor: 2200Kv Inrunner (HET Typhoon 2W-30 recommandé)
  • Motor diameter: 28-36mm
  • Max. weight of motor: 150g
  • ESC: 100-120A
  • Propeller: 4.75x4.75 or 5x5 or 5.5x4.7 (pusher)
  • Minimum 4 channels radio and receiver
  • 2x mini wing servos 30x10x30
  • 1x micro servo 12x23
  • 2600-3200 mAh Lipo Battery 6S
  • Lipo Battery Charger
  • Estimated build time is 2 hours



No customer reviews for the moment.

Write a review


30 other products in the same category:

Customers who bought this product also bought: