• Combo configurator

  • Arrows RC

  • JP Hobby Landing Gears List

  • Freewing Kits

  • Scratch and dents

  • Mini Series

Manufacturers

Specials

Viewed products

  

Purchase a gift voucher

  

SebArt Mini MB-339 90mm Jet 1,38m + JP Hobby 90mm 6S PNP (White/Orange)

SEB-MB140-FT+JPH6S

New product

Sebart

Combo with JP Hobby 90mm full metal EDF with 6s 1750kv motor and ESC - Sebart fiberglass mini Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

More details

Available on order

By buying this product you can collect up to 945 points . Your cart will total 945 points that can be converted into a voucher of $22.80 .


$1,140.06

Instead of $1,264.23

Must have accessories and options

SERVOS

Data sheet

Type of kit:ARF
Wingspan (mm):1380mm / 54.33in
Length (mm):1440mm / 56.7in
Weight (gr):2.99kg / 6.59lb (without battery)
Flying weight (gr)env. 3.85kg / 8.49lb (with 5800mAh 6s Lipo)
Wing Surface Area:33dm² / 589 sq in
CG (Center of Gravity)Check manual
Servos3x servos 12g / 0.02lb
Direction of Rotation (EDF Rotor)Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):90
Turbine shroudMetal
EDF RotorMetal
Turns/min/Volt (Kv):1750 Kv
Motor Type:Out-Runner
Electronic Speed Control150A + BEC 5A
Battery Cells:6s - 22.2v
Battery Capacity (mAh)5.000 mAh, 5.800 mAh
SurfacesAilerons, Rudder, Elevator, Flaps
Landing GearFull metal retractable main and steerable nose gear with shock absorbing struts, Retractable suspended gear
MaterialFiberglass, Balsa, Oracover wings coverage
Build time16 hours
Required Radio6 channels minimum
Recommended pilot skill levelIntermediate, Advanced

More info

SebArt Mini MB-339 90mm Jet 1,38m + JP Hobby 90mm 6S PNP (White/Orange)

Combo with JP Hobby 90mm full metal EDF with 6s 1750kv moto, 150A HV ESC and 5A Ubec.

Sebart fiberglass mini Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

The all new MB-339 Jet ARF was designed by Italian aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model design is based on real aircraft design and added the ultimate aerodynamically ideas of the modernst pattern models, using the 15 years experience in flying jets of Seba.... the result is surprising!

This innovative design combined with the lightweight structure, the fiberglass fuselage and all wood airframe wings and stabs, give the Mini MB-339 Jet ARF an impressive precision and smoothness at any airspeed and flight condition. Thanks of his low wingload and the powerfull 90mm EDF or the P20-K30 turbine, it can be a fantastic aerobatic jet-trainer… let you surprise from your new MB-339 Jet ARF !

We are available to discuss with you the best EDF setting for this model. You can also select one of the combos with EDF and ESC available on the store.

Different parts and options available to complete the kit.

Features

  • Painted fiberglass fuselage
  • Wings and stabilizers in balsa covered with Oracover
  • Retract aluminium landing gear + doors installed 

Technical specifications

  • Wing Span: 1380mm / 54.33in
  • Length: 1440mm / 56.7in
  • Wing area: 33dm² / 589 sq in
  • Weight (EDF version): 2.99kg / 6.59lb (without battery)
  • Flying weight (version EDF): approx. 3.85kg / 8.49lb (with 5800mAh 6s Lipo) 
  • Weight (turbine jet version): 3.23kg / 7.12lb (empty tank and no turbine battery)

Includes

  • SebArt Mini MB-339 90mm Jet 1,38m
  • 2x servos 12g for electric retract landing gear with doors sequencer (included)
  • 1x servo 12g for front steering landing gear (included)
  • Manual in English
  • JP Hobby 90mm full metal EDF + 6S motor 1750kv
  • 150A ESC
  • 5A UBEC

Requires

  • Minimum 6 channels radio and receiver
  • 7x sub micro servos 17g (1x rudder, 2x elevator, 2x ailerons, 2x flaps)
  • 5000-5800 mAh 35-50c Lipo Battery 6 cells
  • Lipo Battery Charger 6 cells
  • Estimated build time is 16 hours

EDF Ducted Fan JP Hobby 90mm + 6s Motor 1750Kv

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 6s.

Description

  • The V2 version offers an exceptionnal reduced gap of 0.25mm between each blade edge and the EDF shroud for more efficiency.
  • Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
  • The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
  • The highly rigid structure design is capable of running up to 88,000 RPM to produce extremely high efflux velocity for maximum speed and efficiency.
  • Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
  • Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
  • You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.


Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

 Description / LiPo   6s (22.2v)  6s (24.0v)   6s (25.2v)  
 Thrust:3.57 kg  4.01 kg 4.32 kg
 Current:103 A117 A126 A
 Power:2286 W2808 W3175 W
 Recommended ESC:  120 A / LV 150 A / LV 150 A / LV 
 Recommended battery:  3500mAh 40C   3500mAh 40C  3500mAh 40C 

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

  • Special high grade aluminum quality
  • Motor Kv: 1750
  • Motor type: JP 4250-Ⅵ-1750kv (5mm axe) 12 poles (outrunner)
  • Rotor: 90mm 12 blades aluminium
  • External diameter: 94.5mm
  • Internal diameter: 90.5mm
  • Ejection diameter: nc
  • Combo max thrust: 4.32kg
  • Weight: 459g (combo EDF + lip + motor )
  • Max efficiency: 90 %
  • Recommended max. rotation speed: 75,600 RPM
  • Speed Control Advanced Timing Setting: 15°
  • Connections: Banana / PK 5mm (in place)

Reviews

No customer reviews for the moment.

Write a review

SebArt Mini MB-339 90mm Jet 1,38m + JP Hobby 90mm 6S PNP (White/Orange)

SebArt Mini MB-339 90mm Jet 1,38m + JP Hobby 90mm 6S PNP (White/Orange)

Combo with JP Hobby 90mm full metal EDF with 6s 1750kv motor and ESC - Sebart fiberglass mini Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

Pack content

  • $30.67 $34.08 -10% Out of stock

    Reference: A2P-S03878565

    1 x
    Review(s): 0

    Pro-Tronik 5A HV 2-12S UBEC. Very compact, very powerful, this accessory is the perfect complement to  any Opto Brushless controllers. The UBEC is a new generation accessory that enables to safely feed the reception of a model from the drive battery, regardless of its voltage up to 42v (12s).

    $30.67 $34.08 -10%
    Add to cart More
    Reduced price!
    Out of stock
  • $270.44 Out of stock

    Reference: JPH-EDF90-6S-CCW

    1 x
    Review(s): 1

    Combo 90mm / 12 pales / 1750Kv (outrunner) / 6S / 459g> 6S (22.2V) : 103A / 3.57kg / 2286W> 6S (24.0V) : 117A / 4.01kg / 2808W> 6S (25.2V) : 126A / 4.32kg / 3175W

    $270.44
    Add to cart More
    Out of stock
  • $169.90 Out of stock

    Reference: JPH-ESC-150

    1 x
    Review(s): 2

    The JP Hobby 150 Amp Brushless Electronic Speed Controller is using a firmware specificaly designated to be used with JP Hobby pole counts motors. A High Power 12S capable system for RC Airplanes and Helicopters.

    $169.90
    Add to cart More
    Out of stock
  • $793.22 Out of stock

    Reference: SEB-MB140-WO

    1 x
    Review(s): 0

    Sebart fiberglass mini Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

    $793.22
    Add to cart More
    Out of stock

Accessories

30 other products in the same category: