Fusion 70mm Jet Composite 6S PNP (Choice of colors)

Fusion 70mm Jet Composite 6S PNP (Choice of colors)

MADE-TO-ORDER: This product is manufactured on demand when the buy button shows ON DEMAND and not AVAILABLE. Made-to-order products are not subject to right of withdrawal and can't be refunded.

Up to 335km/h (208mph)!! 2.65kg of thrust for a 1.45kg flying weight. Move to the next Level!

100% molded composite Super "Funjet" equiped with a 100% carbon 70mm EDF (shroud and rotor), a 100A Phoenix Edge ESC and servos.

Home-made, high quality small scale production. The 70mm EDF Fusion Jet PNP version will be delivered almost ready to be hand launched. The full carbon Vasafan EDF unit designed for high performances has been built and balanced and mounted inside the model such as the 2 wings metal high speed digital servos. The ESC will have to be set in place. We recommend to use a 3M Dual Lock adhesive for both the ESC and the battery. Then you will also have to screw the 2 vertical fin, install your own receiver and the plugs corresponding to your 6s LiPo battery. The 70mm Fusion EDF as been measured at more than 270km/h (169mph) and up to 335km/h (208mph) after a dive!

CAUTION: The Fusion jet is an extremely fast RC model. It can only be used by very experienced RC pilots in the context of a RC model club. Please do not attempt to fly this model if you don't have a large experience of flying very fast models. Additionnaly, the Kirozine version of the Fusion requires other security measures.

Features

• 100% durable composite fiber construction 
• 100% carbon (shroud and rotor) 70mm 7 blade EDF with TP Power 2940 inrunner motor (built and precisely balanced)(mounted inside the model)
• 2 KST X10 Mini HV 10mm (23g 7.5kg.cm, 0.09s/60°) metal digital wing servos (mounted inside the model)
• 1 130A ZTW ESC Mantis G2

Technical specifications

• EDF Thrust: 2.65 kg
• Current: 95 A maxium
• Wingspan: 800 mm
• Length: 780 mm
• Weight (empty): +/- 500 gr
• Flying weight: +/- 1450 gr

Includes

• Fusion 70mm Jet Composite 6S PNP

Requires

• 4 Channel Radio Minimum 
• 4 Channel Receiver Minimum 
• 6 Cell 22.2V 2600-3300 mAh LiPo Battery
  
• Lipo Battery Charger
• 3M Dual Lock adhesive for the batterie and the receiver

Color

You can select your color on this page before proceeding with the order.

Information about the order button:
GREEN: The product is in stock and will be shipped without any delay.
ORANGE: The product will be shipped with a usual delay of 30 days.
Availability may vary pending color choice.