• Combo configurator

  • High End Technology RC (HET) Official Store

  • Freewing Kits

  • JP Hobby Landing Gears List

  • Mini Series

  • Arrows RC

  • Scratch and dents

Manufacturers

Specials

Viewed products

  

Purchase a gift voucher

  
Create quotation from my cart Request a quotation

SebArt Mini Avanti S V3 90mm Jet 1,36m ARF (Gold/White/Red)

SEB-A140-GWR

New product

Sebart

Sebart fiberglass mini Avanti S Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

More details

Available

By buying this product you can collect up to 624 points . Your cart will total 624 points that can be converted into a voucher of $15.06 .


$753.01

Must have accessories and options

SERVOS

Data sheet

Wingspan (mm):1360mm / 53,54 in
Length (mm):1420mm / 55,9 in
Weight (gr):3800 gr (flying weight)
Wing Surface Area:38dm² / 589 sq in
CG (Center of Gravity)Check manual
Servos7x sub micro servos
EDF Diameter Class (mm):90
Battery Capacity (mAh)5000-5.800 mAh
SurfacesAilerons, Rudder, Elevator, Flaps
Landing GearRetractable
MaterialFiberglass
Build time2 heures, 3 hours
Required Radio6 channels minimum
Recommended pilot skill levelIntermediate, Advanced

More info

SebArt Mini Avanti S 90mm Jet 1,36m ARF (Gold/White/Red)

Sebart fiberglass mini Avanti S Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

The Mini Avanti S ARF Jet was designed by the Italian aerobatic champion, Sebastiano Silvestri. This sport ARF jet model design is based on the BAE Hawk real aircraft design and enhanced by adding the ultimate aerodynamics principals of the modern FAI pattern models and using the 15 years experience in flying jets of Seba.... the result is outstanding!

This innovative design combined with a lightweight structure, the full composite fiberglass fuselage and all wood airframe wings and stabs, give the Mini Avanti S new levels of precision and smoothness at any airspeed and flight conditions.

We are available to discuss with you the best EDF setting for this model. You can also select one of the combos with EDF and ESC available on the store.

Different parts and options available to complete the kit.

Features

  • Painted fiberglass fuselage
  • Wings and stabilizers in balsa covered with Oracover
  • Suitable for P20-30 Jet turbine with the "Turbine Kit"
  • Factory installed electric retract landing gearnwith doors sequencer included

Technical specifications

  • Wing Span: 1360mm / 53,54 in
  • Length: 1420mm / 55,9 in
  • Wing area: 38dm² / 589 sq in
  • Weight (EDF version): 2.9kg / 6,393 lb (without battery)
  • Flying weight (version EDF): approx. 3.8kg / 8,377 lb (with 5800mAh 6s Lipo) 
  • Weight (turbine jet version): 3.05kg / 6,724 lb (empty tank and no turbine battery)
  • Flying weight (turbine jet version): 3.75kg / 8,267 lb (battery + 650cc tank fuel)
Note: The factory-installed electric retracts, nose gear door servos and steering servo can NOT be powered by more than 6.0V. If you intend to use HV servos for the control surfaces and use a 2S 7.4V LiPo pack, a voltage regulator will be required to prevent damage to the sequencer.

Includes

  • SebArt Mini Avanti S 90mm Jet 1,36m ARF (Gold/White/Red)
  • Pre-installed electric retracts, gear doors and their 3 corresponding servos and sequencer.

Requires

  • 90mm EDF and ESC
  • Minimum 6 channels radio and receiver
  • 7x sub micro servos (1x rudder, 2x elevator, 2x ailerons, 2x flaps), ie: Spektrum A4030 
  • 5000-5800 mAh 35-50c Lipo Battery (8 to 10s)
  • Lipo Battery Charger
  • Estimated build time is 2 hours
Can also be equiped with a P20-30 Jet turbine with the "Turbine Kit" (available on demand)

Recommended EDF power set up

  • JP Hobby 90mm or Jetfan 90V2

Recommended turbine power set up

  • P20-30N Jet turbine with the "Turbine Kit" (available on that store)

Reviews

Grade 
2019-09-20

Great jet

This Is a great jet. Good build quality very nice paint. Mine has a K 45G2 turbine. Very nice aluminum gear.

  • 2 out of 2 people found this review useful.

Write a review

SebArt Mini Avanti S V3 90mm Jet 1,36m ARF (Gold/White/Red)

SebArt Mini Avanti S V3 90mm Jet 1,36m ARF (Gold/White/Red)

Sebart fiberglass mini Avanti S Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

Accessories

30 other products in the same category:

Customers who bought this product also bought: