FrSky ROTORFLIGHT VANTAC RF007 Archer+ Receiver / FBL Helicopter Flight Controller

FrSky ROTORFLIGHT VANTAC RF007 Archer+ Receiver / FBL Helicopter Flight Controller

The FrSky VANTAC RF007 is a state-of-the-art flybarless (FBL) helicopter flight controller that utilizes the latest 2.x flight control technology from Rotorflight. With its built-in FrSky receiver supporting ACCESS or TW protocol, the RF007 offers a comprehensive range of features along with intuitive configuration, seamless adjustment, and real-time tuning via the ETHOS interface.

Rotorflight Technology and Comprehensive Capabilities

At the heart of the RF007 is an STM32F722 MCU processor, supported by a 3-axis gyro, 3-axis accelerometer, and a barometric sensor. Together, these components provide the precision and stability needed for pilots to rely on their models. Additionally, the flight controller supports flight data logging with a large 128MB Blackbox, giving users a wealth of data to optimize their model and troubleshoot issues.

Internal FrSky Receiver and External Receiver Support

The RF007 includes a built-in FrSky receiver that can connect directly to FrSky transmitters, eliminating the need for an external receiver. The RF007 Archer+ version features an integrated 2.4GHz Archer Plus RS receiver operating in ACCESS or ACCST V2 mode, while the RF007 TWIN features an integrated dual 2.4GHz TW R6 receiver operating in TW mode. The internal receiver has a UART interface running FBUS protocol. For users with other requirements, a compatible receiver can also be connected via the main header or one of the expansion ports. Rotorflight supports a wide range of receiver signal protocols. A full list of supported protocols is available in the Rotorflight Configurator Tool or at https://rotorflight.org.

Field Programming/Tuning with ETHOS Lua

Thanks to telemetry connectivity, Rotorflight offers highly intuitive and integrated Lua-based configuration tools running on ETHOS transmitters. Users can utilize these tools to adjust PID settings, servo trims, rates, mixing/geometry, filter settings, and most other Rotorflight parameters quickly and easily right from the transmitter screen. For supported ESCs, ESC configuration can also be performed through the tool.

Features

• Runs Rotorflight 2.x helicopter control software
• Built-in FrSky FBUS-compatible receiver (TW or AP protocol)
• Durable CNC aluminum housing, functional heatsink for MCU
• STM32F722 microcontroller for high performance and flexibility
• Precision barometer, 3-axis gyro, and 3-axis accelerometer
• 128MB Blackbox function for tuning/troubleshooting
• 9 primary main header pins for flexibility and power distribution

Technical Specifications

• Flight Controller Firmware: Rotorflight 2.x
• Dimensions: 43.5 × 31.2 × 13.7 mm
• Weight: 25.2 g
• Receiver Options:
• • RF007 ARCHER+: Built-In 2.4G Archer Plus RS Receiver
  • RF007 TWIN: Built-In Dual 2.4G TW R6 Receiver
• Operating Voltage Range: 5–16V
• Operating Current (FC only): 125 mA @ 5V
• Voltage Measurement Range via AIN (external device): 0–80V
• RxUG Port: For updating internal RX firmware (if OTA update fails)

Note: When supplying power via the RxUG port, do not supply additional power from other ports to ensure safe operation of connected devices.

• MCU: STM32F722RET6
• Gyroscope (IMU): ICM-42688P
• Barometer: SPL06-001
• Blackbox Flash: 128MB
• Servo Ports: Servo 1, Servo 2, Servo 3, Tail
• ESC Ports: ESC (throttle), RPM (sensor), TLM (ESC telemetry or other functions)
• Other Ports: AUX and SBUS input/output
• Expansion Ports: Port A, C, and RxUG

Content

• 1 x ROTORFLIGHT VANTAC RF007 Archer+ FBL Helicopter Flight Controller
• 1 x Connexion cable
• 1 x Programmation cable
• 1 x Manual