Robbe MDM-1 Fox Glider 3.5m PNP (Orange)

Description

The MDM-1 FOX glider is a legend in two-seater aerobatics in the skies, in the transport of men, as well as in the field of RC. The flight characteristics can be described as extremely good. The FOX flies in any situation, even in aerobatics where it reacts in an agile and dynamic plane.

The 1:4 scale model was developed for uncompromising aerobatics and offers many possibilities of extension (Propeller, EDF or turbine). The potential of FOX is enormous!

Specifications

• In-mold painted Full-Gfk fiberglass fuselage, fitted with many tried and tested Cfk carbon reinforcements
• Compact aerobatic glider with the flight characteristics of a large model
• Removable fiberglass wings equipped with 4 flaps to curve the profile accordingly, adapt to flight conditions and increase maneuverability around the longitudinal axis in aerobatics
• Wing profile: HQ / W 2,5 / 11
• Elevator Profile: NACA 0010
• Wing keys in 18x1mm aluminum tube and reinforced with a Cfk carbon tube

Technical specifications

• Wingspan: 3500mm / 137.79in
• Length: 1800mm / 70.9in
• Flying weight: 7.560kg in 8s
• Motor: Outrunner Ro-Power 5062 305Kv
• Servos : 4x FS-128 BB MG HV digital et 2x FS-525 BB MG HV
• Wiring in the wing by MPX connector
• Radio: 6 channels 
• Recommended EDF battery: 8S (29.6V) 4200mAh  
• Ailerons: Yes
• Elevator: Yes
• Rudder: Yes
• Flaps: Yes
• Propeller: 15*11

Includes

• 1x Robbe MDM-1 Fox 3.5m
• PNP version
• Instructions Manuals 

Requires

• 1x Propeller, EDF or turbine
• 1x ECS 130A (Hobbywing Flyfun 130A)
• Servo extension cables & Multiplex connectors
• 6+ Channel 2.4 GHz Full Range Radio
• 6+ Channel 2.4 GHz Full Range Receiver
• 2x 2 Cell 7.4V 3500mAh
• 2x 4 Cell 14.8V 4000-5000mAh 
• 2-6 Cell Li-Po Battery Charger