EDF Ducted Fan JP Hobby 90mm + 6s Motor 1750Kv View larger

EDF Ducted Fan Freewing 90mm + 6s Motor 1450Kv


New product


Combo 90mm / 12 pales / 1450Kv (outrunner) / 6S / 413g
> 6S (22.2V) : 87A / 3.0kg (approx) / 1930W

More details

This product is no longer in stock

By buying this product you can collect up to 132 points . Your cart will total 132 points that can be converted into a voucher of US $3.12 .

US $156.35

Data sheet

Length (mm): 90.5 mm
Weight (gr): 413 gr
EDF thrust (categorization) 2-3kg, 3-4kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 90
EDF Outside Diameter (mm): 93 mm
Rotor Diameter (mm): 90 mm
Blades: 12
Stators: 8
Turbine shroud Metal
EDF Rotor Synthetic
Turns/min/Volt (Kv): 1450 Kv
Motor Type: Out-Runner
Motor Diameter (mm): 37 mm
Battery Cells: 6s - 22.2v
Connection: PK 4mm

More info

EDF Ducted Fan Freewing 90mm + 6s Motor 1450Kv

Can be for instance used with the Freewing Stinger 90mm EDF Jet. The motor and fan unit comes assembled and balanced from the factory.


 Description / LiPo    6s (22.2v) 
 Thrust: 3.0 kg 
 Current: 87 A
 Power: 1930 W
 Recommended ESC:   110 A / LV
 Min recommended battery:   3500mAh 40C  
About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.


  • Rotor Blade Material: Nylon Composite with injected fiber
  • Outer Diameter: 93mm
  • Length: 90.5mm
  • Weight: 413g 
  • Rotor: 90mm 12 Blade Normal 
  • Spinner: Aluminium Spinner 
  • Motor: 3748 1450Kv Outrunner motor (Installed)
  • Working Voltage: 6s  22.2v 
  • Static Thrust: Around 3.0kg ( 87A )
  • Connections: Banana / PK 4mm (in place)


  • 1x EDF Ducted Fan Freewing 90mm + 6s Motor 1450Kv