• Combo configurator

  • Arrows RC

  • JP Hobby Landing Gears List

  • Freewing Kits


Viewed products


Purchase a gift voucher

Gift Vouchers Turbines RC

EPF Hobby Mercury II 14 Blade 216mm EDF Ducted Fan + 200Kv Motor 22s


New product

EPF Hobby

Combo 216mm / 14 blade / 200KV (outrunner) / 22S / 3290g
> 22S (81.4V) : 160A / 23kg max / 13024W

More details

Available on order

By buying this product you can collect up to 3499 points . Your cart will total 3499 points that can be converted into a voucher of 69,98 € .

3 499,00 €

Data sheet

Weight (gr):3290 gr
EDF thrust (categorization)12kg+
Direction of Rotation (EDF Rotor)Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):216
Turbine shroudMetal
EDF RotorMetal
Turns/min/Volt (Kv):200 kv
Motor Type:Out-Runner
Motor Diameter (mm):80
Power (Watts):13024
Battery Cells:22s - 81.4v

More info

EPF Hobby Mercury II 14 Blade 216mm EDF Ducted Fan + 200Kv Motor 12s

Up to 23kg of static thrust!

EPF Hobby Mercury II 14 Blades 216mm EDF Ducted Fan + 200Kv Motor 22s combo, pre-mounted and dynamically balanced.

Mercury EDF are full alloy high precision CNC made and are offering a very good thermal dissipation. The 14 blade rotor is also made of aluminium and accepts high rotation speeds. The front "spinner" does not rotate (vibration risk elimination) and is protected between 2 sets of 6 stators. Eliminating any risk of rotor ejection. The brushless motor is located at the front of the edf for a better head dissipation.

MADE-TO-ORDER: This product is manufactured on demand when the buy button shows ORDER or ON DEMAND and not AVAILABLE. Made-to-order products are not subject to right of withdrawal and can't be refunded.
Note: production time before shipment is around 45-60 days.


  • Turbo Innercooling System let EDF down to room temperature whithin 15~20 seconds half throttle
  • 60000 RPM High Speed Dynamical Balance Adjustment Rotator and Fan 
  • High Precision CNC Cutting Rotator and Fan
  • The 14 fan blade is the first in the world to use high tensile aluminum alloy
  • Full Alloy Design
  • Optimized Air Flow


 Characteristics / LIPO  22s
 Current160 A
 Power13024 W

23 kg max

 Controller   >=200A/ HV
 Recommended Battery    8000 mAh 35C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.


  • Max Power: 13024 Watts
  • Duct Inside diameter: Φ216mm 
  • Total Weight: 3290g 
  • Blades number: 14 (CNC aluminium)
  • Motor: 80mm - 200kv Brushless
  • Motor timing: Auto or 15 degree
  • Working voltage: 81.4v (22s)


  • 1x Mercury II 216mm KV200 EDF
  • 1x Install Manual
  • 4x Mounting screw


No customer reviews for the moment.

Write a review

30 other products in the same category:

Follow us on Facebook