Ducted Fan EDF JETFAN-90 V2 Ejets + HET 700-60-2085 motor

EJT-JF90V2-700602085

New

This combo equiped with the Typhoon HET 700-68-2085 generates 2,75kg of thrust / 88A with 5S and 3,5kg of thrust / 110A with 6S.

More details

Available

By buying this product you can collect up to 225 loyalty points. Your cart will total 225 points that can be converted into a voucher of 6,75 €.


225,00 €

Instead of 234,90 €

Add to wishlist

Accessories

Data sheet

EDF thrust (categorization) 2-3kg, 3-4kg
EDF Diameter Class (mm): 90
Blades: 9
Turns/min/Volt (Kv): 2085
Motor Type: In-Runner
Motor Diameter (mm): 39
Battery Cells: 5s - 18.5v, 6s - 22.2v

More info

Ducted Fan EDF JETFAN-90 V2 Ejets + HET 700-60-2085 motor

This combo equiped with the Typhoon HET 700-68-2085 generates 2,75kg of thrust / 88A with 5S and 3,5kg of thrust / 110A with 6S.

 Caracteristics / LIPO 5S 6S
 Voltage 18.43v 22.35v
 Current  85.10A 110.4A
 Power  1570W  2600W
 Thrust 2.6kg   3.5kg
 Controller  >=80A / LV  >=130A / LV
 Battery >= 2600mAh 35C  >= 3000mAh 35C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.


About the Ejets JETFAN 90 V2 EDF Unit

The new ducted fan unit JETFAN-90 was designed especially for the new 90mm EDF-class.  Ejets reached its goal to gain much more thrust and E-Flux for a more dynamic climbing and high speed passes together with a much better whooshing sound. THIS JETFAN-90 is NOT CRYING. Also the usage of your existing 36mm up to 41mm outer diameter motors is possible. So you have the advantage to choose from a wider range of acailable motors. So now the change to a better, powerfull flying of your existing 90mm jets will come true!

The weight of the JETFAN-90 is 122 gramm / 4,3 ounces.

Thurst is 3,6kg for 95A in 8s configuration. Can be up to 4,6kg and higher with higher voltage configuration.

JETFAN Ducted fans are already balanced.

Description

  • Length : 58,6mm
  • Rotor diam.: 88,6mm
  • Indisde diam.: 90mm
  • Outside diam.: 93mm
  • For: 3-12s Lipo (11,1 to 44,4v)
  • Input power: 750-5500 watts
  • Max RPM: 55 000
  • max static thrust: 6,5kg
  • Rotor: 9 blades
  • Weight: 122g
  • Motor housing: accepts 36-41mm DIA motors
  • Shaft adaptor: accepts a 5mm DIA motor shaft
  • Delivered without motor

About the Thyphoon HET 700-60-2085 motor

Typhoon HET EDF 700-60-2085 Motor 39mm, recommended for 5s or 6s configuration. Suitable for 90mm HET EDF unit 9305-700, DS 51 or equivalent. Also suitable for 90mm 9 bladed JETFAN-90 for 6s Lipo. This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.

Description

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

Specification

  • Diameter: 39 mm 
  • Length: 60 mm
  • Shaft Dia.: 5 mm 
  • Weight : 280 grams
  • No load current(lo): 1.9
  • Rm (Ohm) : 7.80
  • KV: 2085
  • Poles: 4
  • Max Current: 70 A
  • Max efficiency: 85%
  • Recommended advance timing: low
  • Power Nominal: 1200 Watts (max: 2400 W)
  • Recommended ESC from 90-120A
  • Specially designed for 9305-700 fan unit
  • Includes Aluminum Heat Sink and tools

     

Reviews

Write a review

Ducted Fan EDF JETFAN-90 V2 Ejets + HET 700-60-2085 motor

Ducted Fan EDF JETFAN-90 V2 Ejets + HET 700-60-2085 motor

This combo equiped with the Typhoon HET 700-68-2085 generates 2,75kg of thrust / 88A with 5S and 3,5kg of thrust / 110A with 6S.

Write a review

30 other products in the same category:

Customers who bought this product also bought:

Pack content