• Combo configurator

  • Arrows RC

  • JP Hobby Landing Gears List

  • Freewing Kits

  • Scratch and dents

  • Mini Series

Manufacturers

Specials

Viewed products

  

Purchase a gift voucher

  
Create quotation from my cart Request a quotation

Ducted Fan EDF JETFAN-130 PRO Ejets + TFL SSS 56104-650

EJT-JF130P-SSS56104-650

New product

Ejets Jetfan

Combo 130mm / 11 blades / 650Kv (inrunner) / 1480g
> 12S (45.3V) : 144A / 10kg / 6537W
> 14S (53.1V) : 182A / 13kg / 9681W

More details

Available on order

By buying this product you can collect up to 624 points . Your cart will total 624 points that can be converted into a voucher of $15.06 .


$753.01

Instead of $779.14

Data sheet

Length (mm):100 mm
Weight (gr):1480 gr
EDF thrust (categorization)10-12kg, 12kg+
Direction of Rotation (EDF Rotor)Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):130
Blades:11
Turbine shroudCarbon
EDF RotorSynthetic
Turns/min/Volt (Kv):650
Motor Type:In-Runner
Motor Diameter (mm):56
Shaft diameter (mm):10
Battery Cells:12s - 44.4v, 14s - 51.8v
Connection:PK 8mm

More info

Ducted Fan EDF JETFAN-130 PRO Ejets + TFL SSS 56104-650

 Characteristics / LIPO12S 14S
 Voltage45.3 V54.5v
 Current144 A182 A
 Power6537 W9919 W
 Thrust10 Kg13 Kg 
 Controller>=170A / HV>=220A / HV
 Recommended battery >=5000mAh 35C >=5800mAh 65C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.


About the Ejets JETFAN 130 PRO EDF Unit

New ducted fan unit JETFAN-130 PRO for jet models of the 130 mm class, as well as the 90s -100er turbines class! The new JETFAN-130 PRO has been developed for large jet models up to 17.5 kilo weight.

Description

The basic design was matched to 56mm engines, which bring up to 13.5 kilos thrust under test bench conditions at 14s. For higher thrusts up to 15.5 kilos, 15-16s drives are conceivable, the JETFAN-130 PRO can do it! The customers' requirement for a little more "audible punch and turbine noise" is achieved by more blades and lowering of the speed. Thus, we have again a distinctive sound, and could suppress the unpleasant high frequencies.

Technical Description

  • Length: 100mm
  • Rotor diam.: 129mm
  • Indisde diam.: 131mm
  • Outside diam.: 133mm
  • For: 12-16s Lipo
  • Input power: -
  • Max RPM: -
  • max static thrust: approx 15kg (16s)
  • Max exhaust speed range: 315km/h (10kg) to 390km/h (15kg)
  • Rotor: 11 blades
  • Weight: 380gr
  • Motor housing: accepts 56mm DIA motors
  • Shaft adaptor: accepts a 10mm DIA motor shaft
  • Delivered without motor

About the TFL SSS 56104-650 motor

Specifications

  • Diameter : 56 mm 
  • Length : 104 mm
  • Shaft Dia. : 10 mm 
  • Shaft length : 22 mm
  • Weight : 1100 gr
  • Internal resistance: tbc
  • KV : 600
  • No load current (lo): 2
  • Max Amps : 180A
  • Max voltage : 77V
  • Max power : 14000W
  • Max RPM : 50 000
  • Max efficiency: tbc
  • Poles : 6
  • Recommended advance timing : tbc
 
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
Warning: Screws that are too long can short out the windings resulting in a cooked motor, this is not covered by warranty

Reviews

No customer reviews for the moment.

Write a review

Ducted Fan EDF JETFAN-130 PRO Ejets + TFL SSS 56104-650

Ducted Fan EDF JETFAN-130 PRO Ejets + TFL SSS 56104-650

Combo 130mm / 11 blades / 650Kv (inrunner) / 1480g
> 12S (45.3V) : 144A / 10kg / 6537W
> 14S (53.1V) : 182A / 13kg / 9681W

Pack content

Accessories

30 other products in the same category:

Customers who bought this product also bought: