> >>>Ducted Fan EDF JETFAN-120 PRO Ejets + HET 800-60-535

  • Combo configurator

    Combo configurator

  • High End Technology RC (HET) Official Store

    High End Technology RC (HET) Official Store

  • Kolibri

    Kolibri

  • Freewing Kits

    Freewing Kits

  • JP Hobby Landing Gears List

    JP Hobby Landing Gears List

  • Mini Series

    Mini Series

  • Arrows RC

    Arrows RC

  • Scratch and dents

    Scratch and dents

Manufacturers

Specials

Viewed products

  

Purchase a gift voucher

  

Gift Vouchers TURBINES RC   

Create quotation from my cart Request a quotation
Ducted Fan EDF JETFAN-120 eco Ejets 120mm Carbon (8mm adapter) View larger
Previous Next

Ducted Fan EDF JETFAN-120 PRO Ejets + HET 800-60-535

EJT-JF120P-80060535

New product

Ejets Jetfan

This combo is equiped with the Typhoon HET 800-60-535kv and generates 5,8kg / 72A with 12S and 7,6kg / 90A with 14S.

More details

Available on order

By buying this product you can collect up to 362 points . Your cart will total 362 points that can be converted into a voucher of $8.69 .


$435.00

Instead of $459.00

Must have accessories and options

INTAKE LIP:

Carbon Intake Ring for Ejets JETFAN-120 PRO Carbon Intake Ring for Ejets JETFAN-120 PRO
$44.00

BRUSHLESS CONTROLLER:

HET ZEUS 120A HV ESC 6-12S OPTO HET ZEUS 120A HV ESC 6-12S OPTO
$159.00
JP Hobby 200A HV ESC 6-16S OPTO JP Hobby 200A HV ESC 6-16S OPTO
$399.00

Data sheet

Length (mm): 80
Weight (gr): 646
EDF thrust (categorization) 5-6kg, 6-8kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 120
EDF Outside Diameter (mm): 122.8
EDF Inner Diameter (mm) : 120
Rotor Diameter (mm): 118.8
Blades: 11
Turbine shroud Carbon
EDF Rotor Synthetic
Turns/min/Volt (Kv): 535
Motor Type: In-Runner
Motor Diameter (mm): 50
Shaft diameter (mm): 8
Battery Cells: 12s - 44.4v, 14s - 51.8v

More info

Ducted Fan EDF JETFAN-120 PRO Ejets + HET 800-60-535

This combo is equiped with the Typhoon HET 800-60-535kv and generates 5,6kg / 67A with 12S and 7,5kg / 88A with 14S.

 Characteristics / LIPO 12S 14S
 Voltage 44.6v 52.8v
 Current 67.2 A  88.1 A
 Power 2994 W 4652 W
 Thrust 5.6kg   7.5kg
 Controller  >=80A / HV  >=70A / HV
 Recommended battery (measured with)   3000mAh 35C   4000mAh 35C  

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.


About the Ejets JETFAN 120 PRO EDF Unit

Description

The new carbon-120 JETFAN-120 PRO has been developed by Ejets for even more thrust with the same input power and better suction even with small and poor inlets. Ejets even achieve a weight reduction of 88 grams, and thus a total weight of 246 grams without heat sink, and 767 grams with mounted HET-800-73-590 KV engine! The basic design has been tuned to 50mm engines that are airborne with your full surface and bring up to 10 kilos of thrust under test bench conditions at 14s. The customers' requirement for a little more "audible punch and turbine noise" is achieved by more blades and lowering of the speed. Thus, we have again a distinctive sound, and could suppress the unpleasant high frequencies.

JETFAN ducted fans are already balanced.

 Technical Description

  • Length: 80mm
  • Rotor diam.: -
  • Indisde diam.:120mm
  • Outside diam.: 122.8mm
  • For: 10-14s Lipo (37 to 51,8v)
  • Input power: 2000-7500 watts
  • Max RPM: -
  • max static thrust: approx 10kg (14s)
  • Rotor: 11 blades
  • Weight: 246 grams without heat sink (767 grams with a 50mm Het Typhoon 800-73-590)
  • Motor housing: accepts 50mm DIA motors
  • Shaft adaptor: accepts a 8mm DIA motor shaft
  • Delivered without motor

About the Thyphoon HET 800-60-535 motor

Typhoon HET 800-60 series brushless motors are designed for 110mm, 120mm and other fan units that demand the ultimate in performance.  The 800-60 series offers high power output for super large edf fan units. A 50mm diameter 8 pole with superb efficiency, recommended for the Ejets Jetfan 120mm.

Description

  • High Temperature magnets and stator wire
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

Technical Specifications

  • Diameter : 50 mm
  • Length : 60 mm
  • Shaft Dia. : 8 mm 
  • Weight : 400 grams 
  • Internal resistance: 10.4
  • KV : 535
  • No load current (lo): 2.3 
  • Max efficiency: 88% 
  • Poles : 8
  • Recommended advance timing : low

Reviews

No customer reviews for the moment.

Write a review

Ducted Fan EDF JETFAN-120 PRO Ejets + HET 800-60-535

Ducted Fan EDF JETFAN-120 PRO Ejets + HET 800-60-535

This combo is equiped with the Typhoon HET 800-60-535kv and generates 5,8kg / 72A with 12S and 7,6kg / 90A with 14S.

Pack content

Accessories

30 other products in the same category:

Customers who bought this product also bought: