Manufacturers

Specials

Viewed products

  

Purchase a gift voucher

  

Ducted Fan EDF JETFAN-110 Pro Ejets + HET 700-98-935 motor

EJT-JF110P-70098935

New product

Ejets Jetfan

This combo Ejets Jetfan-110mm Pro EDF equiped with the Typhoon HET 700-98-935KV motor generates approx 6.5kg / 114A with 10S.

More details

This product is no longer in stock

By buying this product you can collect up to 274 loyalty points. Your cart will total 274 loyalty points that can be converted into a voucher of $9.34.


$311.69

Instead of $317.37

Pack content

Data sheet

Weight (gr): 740 gr
EDF thrust (categorization) 6-8kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 110
Blades: 11
Stators: 4
Turbine shroud Carbon
EDF Rotor Synthetic
Turns/min/Volt (Kv): 935 Kv
Motor Type: In-Runner
Motor Diameter (mm): 39
No. of Magnet Poles: 4
Shaft diameter (mm): 8
Battery Cells: 10s - 37v
Working voltage (Volts/LiPo Cells): 37v / 10s

More info

Ducted Fan EDF JETFAN-110 Pro Ejets + HET 700-98-935 motor

This combo Ejets Jetfan-110mm Pro EDF equiped with the Typhoon HET 700-98-935KV motor generates approx 6.5kg / 114A with 10S.

 Caractéristiques / Tension 10S 
 Voltage 35.1V
 Current 114A
 Power 4000W
 Thrust 6.55kg
Controller >= 130A / HV
Recommended battery (measure : 5800mAh 35C ) >= 4500mAh 35C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.

Important: this combo required a very efficient and large sink. Motor is hot even with heat sink


About the Ejets JETFAN 110 Pro EDF Unit

The new ducted fan unit JETFAN-110 PRO was designed especially for the new 100mm EDF-class or 55 to 60 turbine class.

Description

The new ducted fan unit JETFAN-110 PRO was designed especially for the new 100mm EDF-class.  Ejets reached its goal to gain much more thrust and E-Flux for a more dynamic climbing and high speed passes together with a much better whooshing sound. THIS JETFAN-110 is NOT CRYING. 

The new stator design the highest possible throughput surface / FSA is now reached and the entire engine surface  is cooled . For input powers more than 3,000 watts, the original heat sink should be mounted in the HET - motors .

Also the usage of your existing 39.1mm up to 40mm outer diameter motors is possible. So you have the advantage to choose from a wider range of available motors. So now the change to a better, powerfull flying of your existing 100mm jets will come true!

The weight of the JETFAN-110 is 185 gr, the lightest one in this category.

JETFAN Ducted fans are already balanced.

 Technical Description

  • Length: -
  • Rotor diam.: -
  • Indisde diam.: -
  • Outside diam.: -
  • For: 10s Lipo (37v)
  • Input power: 2000-7500 watts
  • Max RPM: -
  • max static thrust: approx 6.5kg (10s)
  • Rotor: 11 blades
  • Weight: 185g
  • Motor housing: accepts 39.1-40mm DIA motors
  • Shaft adaptor: accepts a 8mm DIA motor shaft
  • Delivered without motor

About the Typhoon HET EDF 700-98 Motor 39mm 935Kv

Typhoon HET 700-98 series brushless motors are designed for 100 to 120 mm fan units that demand the ultimate in performance.  The 700-98 series offers high power output for large edf fan units.

Description:

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

Specification:

  • Diameter: 39 mm 
  • Length: 98 mm
  • Shaft Dia.: 8 mm
  • Weight: 560 g
  • No load current(lo): 1.9(12v)
  • Rm (Ohm): na
  • KV Rating: 935
  • Poles: 4
  • Max efficiency: 85%
  • Recommended advance timing: low (5-10°)
  • Li-Po Packs: 10-12S
  • Continous Watts: 2400 - Max Watts: 4800
  • Includes Aluminum Heat Sink and tools
 
 
Note: This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit (work with HET 9305-700 fan unit).
Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
Warning: Screws that are too long can short out the windings resulting in a cooked motor, this is not covered by warranty

HET Typhoon motor 700-83 series specs

  • Reviews
  • Write a review

    Ducted Fan EDF JETFAN-110 Pro Ejets + HET 700-98-935 motor

    Ducted Fan EDF JETFAN-110 Pro Ejets + HET 700-98-935 motor

    This combo Ejets Jetfan-110mm Pro EDF equiped with the Typhoon HET 700-98-935KV motor generates approx 6.5kg / 114A with 10S.

    Accessories

    30 other products in the same category:

    Customers who bought this product also bought:

    Follow us on Facebook