Ducted Fan EDF JETFAN-90 V3 Ejets + HET 700-83-1445 motor

EJT-JF90V3-700831445

New product

Ejets Jetfan

This combo Ejets Jetfan-90mm V3 EDF equiped with the Typhoon HET 700-83-1445KV motor generates approx 5,6kg of thrust / 126A with 10S.

More details

Available

By buying this product you can collect up to 282 points . Your cart will total 282 points that can be converted into a voucher of US $6.66 .


US $333.35

Instead of US $342.20

Accessories and other versions

Data sheet

Weight (gr): 589
EDF thrust (categorization) 5-6kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 90
Blades: 9
Turns/min/Volt (Kv): 1445
Motor Type: In-Runner
Motor Diameter (mm): 39
Shaft diameter (mm): 5
Battery Cells: 10s - 37v

More info

Ducted Fan EDF JETFAN-90 V3 Ejets + HET 700-83-1445 motor

This combo Ejets Jetfan-90mm V3 EDF equiped with the Typhoon HET 700-83-1445KV motor generates approx 5,6kg of thrust / 126A with 10S.

 Caracteristics / LIPO 10S
 Voltage 37v
 Current 126.8A
 Power  4691W
 Thrust 5.6kg
 Controller  >= 150A / HV
 Recommended Battery (measured with: 5500mAh 35C)   >= 4500mAh 35C  

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.

About the Ejets JETFAN 90 V3 EDF Unit

The new JETFAN-90 V3 EDF provides better engine cooling, as for models in 100 - 110 - 120 and 130 pro. In addition, it has been specially designed to improve the performance and noise of the Jets category using 90mm EDF.  Ejets reached its goal to gain much more thrust and E-Flux for a more dynamic climbing and high speed passes. Also a much better whooshing sound was theresult. THIS JETFAN-80 is NOT CRYING. Also the usage of your existing 36mm up to 41mm outer diameter motors is possible. So you have the advantage to choose from a wider range of available motors. So now the change to a better, powerfull flying of your existing 80mm jets will come true!

JETFAN EDF are already balanced.

 Description

  • Length : 58,6mm
  • Rotor diam.: 88,6mm
  • Indisde diam.: 90mm
  • Outside diam.: 93mm
  • For: 3-12s Lipo (11,1 to 44,4v)
  • Input power: 750-5500 watts
  • Max RPM: 55 000
  • max static thrust: 6,5kg
  • Rotor: 9 blades
  • Weight: 122g
  • Motor housing: accepts 36-41mm DIA motors
  • Shaft adaptor: accepts a 5mm DIA motor shaft
  • Delivered without motor 

About the Typhoon HET 700-83-1445 motor

Typhoon HET 700-83 series brushless motors are designed for 90 and 120 mm fan units that demand the ultimate in performance.  The 700-83 series offers high power output for large edf fan units.  The 700 series motors will work with the HET 120mm fan units, the HET 9305-700 90mm fan unitsn the Ejets Jetfan 80 et 90 units and  the Schubeler DS-94 HDT.  The fan comes with a heat sink and tools for mounting. This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.

Description

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced 

Specification

  • Diameter: 39 mm 
  • Length: 3.25"/ 82.8 mm
  • Shaft Dia.: 8 mm (exist 5mm)
  • Weight: 16 oz./ 460 g
  • No load current(lo): 3.2(12v)
  • Rm (Ohm): 6.80
  • Io (A): 3.2A(12V)
  • KV Rating: 1445
  • Poles: 4
 
  • Reviews
  • No customer reviews for the moment.

    Write a review

    Ducted Fan EDF JETFAN-90 V3 Ejets + HET 700-83-1445 motor

    Ducted Fan EDF JETFAN-90 V3 Ejets + HET 700-83-1445 motor

    This combo Ejets Jetfan-90mm V3 EDF equiped with the Typhoon HET 700-83-1445KV motor generates approx 5,6kg of thrust / 126A with 10S.

    30 other products in the same category:

    Customers who bought this product also bought: