Ducted Fan EDF JETFAN-90 V3 Ejets + HET 700-60-1738 motor

EJT-JF90V3-700601738

New product

Ejets Jetfan

This combo equiped with the Typhoon HET 700-60-1738 generates 2,55kg of thrust / 69A with 6S.

More details

Available

By buying this product you can collect up to 257 points . Your cart will total 257 points that can be converted into a voucher of US $6.07 .


US $303.85

Instead of US $312.70

Accessories and other versions

Data sheet

EDF thrust (categorization) 2-3kg
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 90
Blades: 9
Turns/min/Volt (Kv): 1738
Motor Type: In-Runner
Motor Diameter (mm): 39
Shaft diameter (mm): 5
Battery Cells: 6s - 22.2v

More info

Turbine EDF Ejets JETFAN-90 V3 + HET 700-60-1738 motor

This combo equiped with the Typhoon HET 700-60-1738 generates 2,55kg of thrust / 69A with 6S.

 Caracteristics / LIPO 6S
 Voltage 22.3v
 Current 69.31A
 Power  1560W
 Thrust  2,55kg
 Controller  >=80A / LV
 Battery (test battery 5000mAh 55c)  >= 3000mAh 35C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.

About the Ejets JETFAN 90 V3 EDF Unit

The new JETFAN-90 V3 EDF provides better engine cooling, as for models in 100 - 110 - 120 and 130 pro. In addition, it has been specially designed to improve the performance and noise of the Jets category using 90mm EDF.  Ejets reached its goal to gain much more thrust and E-Flux for a more dynamic climbing and high speed passes together with a much better whooshing sound. THIS JETFAN-90 is NOT CRYING. Also the usage of your existing 36mm up to 41mm outer diameter motors is possible. So you have the advantage to choose from a wider range of acailable motors. So now the change to a better, powerfull flying of your existing 90mm jets will come true!

The weight of the JETFAN-90 is 122 gramm / 4,3 ounces.

Thurst is 3,6kg for 95A in 8s configuration. Can be up to 4,6kg and higher with higher voltage configuration.

JETFAN Ducted fans are already balanced.

 Description

  • Length : 58,6mm
  • Rotor diam.: 88,6mm
  • Indisde diam.: 90mm
  • Outside diam.: 93mm
  • For: 3-12s Lipo (11,1 to 44,4v)
  • Input power: 750-5500 watts
  • Max RPM: 55 000
  • max static thrust: 6,5kg
  • Rotor: 9 blades
  • Weight: 122g
  • Motor housing: accepts 36-41mm DIA motors
  • Shaft adaptor: accepts a 5mm DIA motor shaft
  • Delivered without motor

About the Typhoon HET 700-60-1738 motor

Typhoon HET EDF 700-60-1738, recommended for 5s to 8s configuration. Suitable for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent. Suitable for 9 bladed JETFAN-90 EDF units for 6s Lipo and for Mach 80mm EDF units on 7-8s.

Description

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced 

Specification

  • Diameter: 39 mm 
  • Length: 60 mm
  • Shaft Dia.: 5 mm 
  • Weight : 280 grams
  • No load current(lo): 1.6 (10v)
  • Rm (Ohm) : 10.80
  • KV: 1738
  • Poles: 4
  • Max Current: 70 A
  • Max efficiency: 85%
  • Recommended advance timing: low
  • Power Nominal: 1200 Watts (max: 2400 W)
  • Recommended ESC from 80A for 5s Lipo. 100 to 120A for 6 or 8s Lipo.
  • Specially designed for 9305-700 fan unit
  • Includes Aluminum Heat Sink and tools
 
 
 
  • Reviews
  • No customer reviews for the moment.

    Write a review

    Ducted Fan EDF JETFAN-90 V3 Ejets + HET 700-60-1738 motor

    Ducted Fan EDF JETFAN-90 V3 Ejets + HET 700-60-1738 motor

    This combo equiped with the Typhoon HET 700-60-1738 generates 2,55kg of thrust / 69A with 6S.

    30 other products in the same category:

    Customers who bought this product also bought: