Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-1400 motor

EJT-JF80-700681400

New

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-68-1400Kv motor generates approx 3,7kg of thrust / 88A with 10S and 4.8kg / 108A with 12S.

More details

This product is no longer in stock

By buying this product you can collect up to 229 loyalty points. Your cart will total 229 points that can be converted into a voucher of 6,87 €.


229,00 €

Instead of 241,90 €

Add to wishlist

Data sheet

EDF thrust (categorization)3-4kg, 4-5kg
EDF Diameter Class (mm):80
Blades:9
Turns/min/Volt (Kv):1400
Motor Type:In-Runner
Motor Diameter (mm):39
Shaft diameter (mm):5
Battery Cells:10s - 37v, 12s - 44.4v

More info

Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-1400 motor

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-68-1400Kv motor generates approx 3,7kg of thrust / 88A with 10S and 4.8kg / 108A with 12S.

 Caracteristics / LIPO10S12S
 Voltage36.4.2v44.4v
 Current87.91A108.6A
 Power3360W4821W
 Thrust3,67kg4.80kg
 Controller >=110A / HV>=130A / HV
 Recommended Battery (measured with: 5500mAh 35C) >= 4500mAh 35C >= 5500mAh 35C








 
 

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.

About the Ejets JETFAN 80 Unit

The new ducted fan unit JETFAN-80 was designed especially for the new 80mm EDF-class.  Ejets reached its goal to gain much more thrust and E-Flux for a more dynamic climbing and high speed passes. Also a much better whooshing sound was theresult. THIS JETFAN-80 is NOT CRYING. Also the usage of your existing 36mm up to 41mm outer diameter motors is possible. So you have the advantage to choose from a wider range of acailable motors. So now the change to a better, powerfull flying of your existing 80mm jets will come true!

Description 

  • Motor housing: accepts 36-40mm DIA motors
  • Shaft adaptor: accepts a 5mm DIA motor shaft
  • Weight: 120g
  • Length : 66mm
  • Indisde diam.: 80mm
  • Outside diam.: 83mm
  • For: 3-12s Lipo (11,1 to 44,4v)
  • Rotor diam.: 78,6mm
  • Input power: 350-4500 watts
  • Max RPM: 55 000
  • Static thrust: 0.9 - 4.6kg
  • Rotor: 9 blades
  • Delivered without motor

About the Thyphoon HET 700-68-1400 motor

Typhoon HET EDF 700-68-1500 Motor 39mm, recommended for 6s to 10s Lipo and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades for 10s Lipo. Recommended for 90mm JETFAN690 EDF unit type for 8s Lipo. Also suitable for any 90mm ducted fan units using 39mm motor's diameter. This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.

Description

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

Specification

  • Diameter: 39 mm 
  • Length: 60 mm
  • Shaft Dia.: 5 mm 
  • Weight : 330 grams
  • No load current(lo): 1.5 (10v)
  • Rm (Ohm) : 12.20
  • KV: 1400
  • Poles: 4
  • Max efficiency: 85%
  • Recommended advance timing: low
  • Power Nominal: 1400 Watts (max: 3000 W)
  • Max Cells: 10S
  • Recommended ESC from 100A
  • Specially designed for 9305-700 fan unit
  • Includes Aluminum Heat Sink

Reviews

Write a review

Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-1400 motor

Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-1400 motor

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-68-1400Kv motor generates approx 3,7kg of thrust / 88A with 10S and 4.8kg / 108A with 12S.

Write a review

Accessories

30 other products in the same category:

Pack content

  • 1 x

    The new ducted fan unit JETFAN-80 was designed especially for the new 80mm EDF-class and is a very good replacement for any regular 80mm ducted fan such as the Eflite V-32 fan used with the Habu. This EDF will provide you with more thurst and more velocity as well as with a much better whooosh sound !!! The new ducted fan unit JETFAN-80 was designed especially for the new 80mm EDF-class...

    94,90 €
    Add to cart
    Out of stock
  • 1 x

    Assembling and Balancing Service for EDF units and motors. This service is only for EDF up to 90mm size. For larger EDF units please contact us. Assembling and Balancing Service for EDF units and motors. This service is only for EDF...

    22,00 €
    Available
  • 1 x

    Typhoon HET EDF 700-68-1400 Motor 39mm, recommended for 6s to 10s Lipo and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades for 10s Lipo. Recommended for 90mm JETFAN690 EDF unit type for 8s Lipo. Also suitable for any 90mm ducted fan units using... Typhoon HET EDF 700-68-1400 Motor 39mm, recommended for 6s to 10s Lipo and suitable for...

    125,00 €
    Available