Ducted Fan EDF JETFAN-80 Ejets + HET 700-60-1865 motor

EJT-JF80-700601865

New

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-60-1865 motor generates 3,7kg of thrust / 110A with 8S.

More details

This product is no longer in stock

By buying this product you can collect up to 215 loyalty points. Your cart will total 215 points that can be converted into a voucher of 6,45 €.


215,00 €

Instead of 225,90 €

Add to wishlist

Data sheet

EDF thrust (categorization)3-4kg
EDF Diameter Class (mm):80
Blades:9
Turns/min/Volt (Kv):1865
Motor Type:In-Runner
Motor Diameter (mm):39
Shaft diameter (mm):5
Battery Cells:8s - 29.6v

More info

Ducted Fan EDF JETFAN-80 Ejets + HET 700-60-1865 motor

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-60-1865 motor generates 3,7kg of thrust / 110A with 8S.

 Caracteristics / LIPO8S
 Voltage28.6v
 Current 110.5A
 Power 3170W
 Thrust3,7kg
 Controller>=135A / HV
 Recommended Battery (measure: 4200mAh 35C) >= 3500mAh 35C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.


About the Ejets JETFAN 80 Unit

The new ducted fan unit JETFAN-80 was designed especially for the new 80mm EDF-class.  Ejets reached its goal to gain much more thrust and E-Flux for a more dynamic climbing and high speed passes. Also a much better whooshing sound was theresult. THIS JETFAN-80 is NOT CRYING. Also the usage of your existing 36mm up to 41mm outer diameter motors is possible. So you have the advantage to choose from a wider range of acailable motors. So now the change to a better, powerfull flying of your existing 80mm jets will come true!

 Description

  • Motor housing: accepts 36-40mm DIA motors
  • Shaft adaptor: accepts a 5mm DIA motor shaft
  • Weight: 120g
  • Length : 66mm
  • Indisde diam.: 80mm
  • Outside diam.: 83mm
  • For: 3-12s Lipo (11,1 to 44,4v)
  • Rotor diam.: 78,6mm
  • Input power: 350-4500 watts
  • Max RPM: 55 000
  • Static thrust: 0.9 - 4.6kg
  • Rotor: 9 blades

About the Thyphoon HET 700-60-1865 motor

The HET Typhoon 700 series brushless motors are designed for 90 mm fan units that demand the ultimate in performance.  The 700 series offers high power output for 90mm edf fan units. 

Typhoon HET EDF 700-60-1865, recommended for 5s to 8s configuration. Suitable for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent. Suitable for 9 bladed JETFAN-90 EDF units for 6s Lipo and for Mach 80mm EDF units on 7-8s.

Description

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

Specification

  • Diameter: 39 mm 
  • Length: 60 mm
  • Shaft Dia.: 5 mm 
  • Weight : 280 grams
  • No load current(lo): 1.4
  • Rm (Ohm) : 8.70
  • KV: 1485
  • Poles: 4
  • Max Current: 70 A
  • Max efficiency: 85%
  • Recommended advance timing: low
  • Power Nominal: 1200 Watts (max: 2400 W)
  • Recommended ESC from 80A for 5s Lipo. 100 to 120A for 6 or 8s Lipo.
  • Specially designed for 9305-700 fan unit
  • Includes aluminum Heat Sink and tools

Reviews

Write a review

Ducted Fan EDF JETFAN-80 Ejets + HET 700-60-1865 motor

Ducted Fan EDF JETFAN-80 Ejets + HET 700-60-1865 motor

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-60-1865 motor generates 3,7kg of thrust / 110A with 8S.

Write a review

Accessories

30 other products in the same category:

Customers who bought this product also bought:

Pack content

  • 1 x

    The new ducted fan unit JETFAN-80 was designed especially for the new 80mm EDF-class and is a very good replacement for any regular 80mm ducted fan such as the Eflite V-32 fan used with the Habu. This EDF will provide you with more thurst and more velocity as well as with a much better whooosh sound !!! The new ducted fan unit JETFAN-80 was designed especially for the new 80mm EDF-class...

    94,90 €
    Add to cart
    Out of stock
  • 1 x

    Typhoon HET EDF 700-60-1865, recommended for 5s to 8s configuration. Suitable for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent. Suitable for 9 bladed JETFAN-90 EDF units for 6s Lipo and for Mach 80mm EDF units on 7-8s. Typhoon HET EDF 700-60-1865, recommended for 5s to 8s configuration. Suitable for 90mm...

    109,00 €
    Add to cart
    Out of stock
  • 1 x

    Assembling and Balancing Service for EDF units and motors. This service is only for EDF up to 90mm size. For larger EDF units please contact us. Assembling and Balancing Service for EDF units and motors. This service is only for EDF...

    22,00 €
    Available