Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-2250 motor

EJT-JF80-700682250

New

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-68-2250 motor generates approx 3,25kg of thrust / 113A with 6S.

More details

Available

By buying this product you can collect up to 229 loyalty points. Your cart will total 229 points that can be converted into a voucher of 6,87 €.


229,00 €

Add to wishlist

Data sheet

EDF thrust (categorization)3-4kg
EDF Diameter Class (mm):80
Blades:9
Turns/min/Volt (Kv):2250
Motor Type:In-Runner
Motor Diameter (mm):39
Shaft diameter (mm):5
Battery Cells:6s - 22.2v

More info

Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-2250 motor

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-68-2250 motor generates approx 3,25kg of thrust / 113A with 6S.

 Characteristics / LIPO6S
 Voltage22.2v
 Current113A
 Power2508W
 Thrust3,25kg
 Controller >=125A / LV
 Recommended Battery (measured with: 4200mAh 35C) >= 3500mAh 35C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.

About the Ejets JETFAN 80 Unit

The new ducted fan unit JETFAN-80 was designed especially for the new 80mm EDF-class.  Ejets reached its goal to gain much more thrust and E-Flux for a more dynamic climbing and high speed passes. Also a much better whooshing sound was theresult. THIS JETFAN-80 is NOT CRYING. Also the usage of your existing 36mm up to 41mm outer diameter motors is possible. So you have the advantage to choose from a wider range of acailable motors. So now the change to a better, powerfull flying of your existing 80mm jets will come true!

 Description

  • Motor housing: accepts 36-40mm DIA motors
  • Shaft adaptor: accepts a 5mm DIA motor shaft
  • Weight: 120g
  • Length : 66mm
  • Indisde diam.: 80mm
  • Outside diam.: 83mm
  • For: 3-12s Lipo (11,1 to 44,4v)
  • Rotor diam.: 78,6mm
  • Input power: 350-4500 watts
  • Max RPM: 55 000
  • Static thrust: 0.9 - 4.6kg
  • Rotor: 9 blades
  • Delivered without motor

 About the Thyphoon HET 700-68-2250 motor

Typhoon HET EDF 700-68-2250 Motor 39mm, recommended for 6s Lipo (5s to 7s Lipo) and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades, for 9 bladed 90mm JETFAN-90 EDF unit type and Stumax EDF type 90mm. Also suitable for any 90mm ducted fan units using 39mm motor's diameter. This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.

Description

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

 Specification

  • Diameter: 39 mm 
  • Length: 67,5 mm
  • Shaft Dia.: 5 mm 
  • Weight : 330 grams
  • No load current(lo): 2.2(10v)
  • Rm (Ohm) : 4.60
  • KV: 2250
  • Poles: 4
  • Max efficiency: 85%
  • Recommended advance timing: low
  • Power Nominal: 1400 Watts (max: 2500 W)
  • Recommended ESC from 70A (5s) to 120A (7s)
  • Specially designed for 9305-700 fan unit
  • Includes Aluminum Heat Sink and tools
 

 

Reviews

Write a review

Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-2250 motor

Ducted Fan EDF JETFAN-80 Ejets + HET 700-68-2250 motor

This combo Ejets Jetfan-80mm EDF equiped with the Typhoon HET 700-68-2250 motor generates approx 3,25kg of thrust / 113A with 6S.

Write a review

Accessories

30 other products in the same category:

Customers who bought this product also bought: