> >>HM Modelltechnik Concorde 2x100mm or turbines 1,45m ARF
HM Modelltechnik Concorde 2x90mm 1,45m View larger
Previous Next

HM Modelltechnik Concorde 2x100mm or turbines 1,45m ARF

New product

HM Modelltechnik

Driven by the fascination of the Concorde and the lack of a R/C model, HM Modelltechnik involved in developing the mythical Concorde.

More details

By buying this product you can collect up to 3165 points . Your cart will total 3165 points that can be converted into a voucher of US $74.69 .


US $3,735.68

Accessories and other versions

Data sheet

Type of kit: ARF
Wingspan (mm): 1450mm / 57.8in
Length (mm): 3400mm / 133.85in
Flying weight (gr) 11kg / 388oz
CG (Center of Gravity) Check manual
EDF Diameter Class (mm): 2x 100
Electronic Speed Control 2 x 120A
Battery Cells: 2x6 cells (total 12 cells)
Battery Capacity (mAh) 8.000 mAh
Surfaces Ailerons, Elevator
Landing Gear Retractable suspended gear
Material Glassfiber/Airex
Required Radio 6 channels minimum
Recommended pilot skill level Advanced, Expert

More info

HM Modelltechnik Concorde 2x100mm or turbines 1,45m ARF

MADE-TO-ORDER: This product is manufactured on demand when the buy button shows ORDER and not AVAILABLE. Made-to-order products are not subject to right of withdrawal and can't be refunded.

We deliver everywhere worldwide.

CURRENTLY AVAILABLE IN STOCK!

PLEASE CONTACT US BEFORE ANY ORDER AND PAYMENT

Description

Driven by the fascination of the Concorde and the lack of a R/C model, HM Modelltechnik involved in developing the mythical Concorde.

Concorde was a supersonic airliner built by the association Sud-Aviation (later Aerospatiale) and BAC (later British Aerospace). Its cruising speed was Mach 2.02 at an altitude ranging from 16,000 to 18,000 meters. It was equipped with a delta wing, called "Gothic", and afterburner turbojet developed first for the British bomber Avro Vulcan. It was also the first civilian aircraft to be equipped with analogue electrical flight controls.

Commercial flights began in 1976 and ended 27 years later, in 2003. The aircraft's high fuel consumption made it run low. Its decline was precipitated by the accident of the flight 4590 of Air France in July 2000, single major accident of a Concorde

The beautiful shape and appearance were transferred to the model and from the very beginning of the project, HM Modelltechnik attached importance to realistic flight characteristics. The full glassfiber construction with a vaccuum sandwich wing design is a lightweight construction where the model is able to, proportional to its own weight, to fly noticeably slower.

This featherweight giant is powered by two 100mm turbines that are satisfied with two LiPo 6S 8000mAh (total 12S) to produce sufficient thrust in flight. The developed technique of the Concorde HM Modelltechnik model offers great flight stability, even at low speeds for the pleasure of the pilots. A track in hard or grass with a length of 100 to 150m is sufficient.

More information

The model is a fully glasfibre construction. Every part is build in vaccuum sandwitch construction and is very light weight. All glasfiber parts have only a weight of in sum 5.1kg. The fuselage consits of 2 parts, easy for transportation (~1.8m and ~1.6m long). Besides the fuselage, there are 3 other parts: left wing, right wing and center section. A special retract was developed with a realistic concorde design (optional). The retract works electric and have 2 braked wheels on each main retract, so 4 braked wheels in total (optional). This is necessary if you fly on a paved runnway. Everything produced in Germany.

This model is not only a pleasure for the audience. For the pilot the HM Modelltechnik Concorde offers a stable flight attitude in gusty winds and also in the range of the stall speed.
A stall will be recovered after a loss of only a few meters altitude with an appropriate powerplant. Short take off and landing roll distances will not be a problem with the recommended equipment. A tarmac or gras runway with the length of 100m is sufficient. Diligent assistants aren't necessarily required since the model consists of multiple parts and can be transported to the airfield in a medium-class car. We also placed importance to the fast and uncomplicated setup at the airfield. Depending on the setup you can reach a flight duration of around 7 minutes plus reserves.

It is a breathtaking feeling to hear after a succesfull flight, excited viewers thought the real Concorde was up in the air. 

The myth Concorde continues to live and exist in the sky.

Features

  • fully resin/glassfiber construction
  • Fuselage in two parts (around 1.8m and 1.6m) for easy transport
  • Wings glassfiber/Airex in separated 3 parts : left wing - right wing - center section
  • Wing Span: 1450mm / 57.8in
  • Length: 3400mm / 133.85in
  • Weight of the fiber parts (without retracts) : 5.1kg / 179.90oz
  • Flying weight with battery 2x6S 8000mah : 11-11.5kg / 388oz
  • Electric retract system
  • Struts fitted for the main wheel of 4 wheels and for the front wheel of 2 wheels (optional)
  • Wheel brakes on two wheels or four wheels per strut (optional)
  • In option: realistic nose section : visor and nose movement in 2 different parts
  • In option: White and black painting of the model as for the real Concorde
  • Flying time: around 5 to 7 minutes with battery 12S (2x6S) 8000mah

Includes

  • HM Modelltechnik Concorde 2x100mm or 2x turbines 1,45m
  • Decals of all windows are included
  • English instruction manual
  • Note: Box size is 195cm x 80 cm x 60 cm and requires a specific delivery method

Requires

  • 2x 100mm EDF and 2x ESC or 2x turbines
  • 6x servos (35x15x31mm) for the wings (dimensions ~ 35 x 15 x 31) with a torque of minimum 70 Ncm with metal gear
  • 1x ECS for retracts (electronic control system for retracts like RB 45 or similar)
  • 1x servo for the steering of the retract
  • Electric landing gear, struts, brakes, wheels (optional)
  • Minimum 6 channels radio and receiver
  • 8000mAh Lipo Battery 2x6 cells in serial (12 cells)
  • Lipo Battery Charger 6 cells

Recommended EDF power set up (see accessories on this page)

  • 2x Hacker Stream-fan 100mm EDF
  • Other 100mm fans can be easily mounted 

Recommended turbines power set up

  • 2x Jetcat P60 turbines (requires a mounting by yourself)
  • 2x exhaust pipes

Optionnal (see accessories on this page)

Realistic nose movement:
  • Visor and nose movement in 2 different parts
  • Set of 1x programmable servo (30x15x30mm) for the visor with min. torque of 40Ncm and a total mouvement rotation of 180 degrees and 1x standard servo for the nose with min. torque of 90Ncm

Standard Painting:

  • White painting of total fuselage of the model (without visible joints). The kit is delivered white and the joint of the fuselage is visible. The optional painting service includes the painting of the fuselage (no joint visible) and the painting of the intakes and half of the nozzles black like the real Concorde.
  • Black painting of the intakes and half of the nozzles like for real Concorde

Superior Painting - Special livery painting:

  • The kit comes by default with a set of decals (British Airways livery Union Flag) but can be on demand painted to any existing livery.

Set of transport bags 

  • Decals set British Airways (livery Union Flag)
Please contact us for delivery timings and for outside of Europe shipping.
When placing your order, please let us know if you intend to install EDF or Turbines and in case of EDF, please let us know the brand and model you will use.
  • Reviews

    • No customer reviews for the moment.

    Write a review

    HM Modelltechnik Concorde 2x100mm or turbines 1,45m ARF

    HM Modelltechnik Concorde 2x100mm or turbines 1,45m ARF

    Driven by the fascination of the Concorde and the lack of a R/C model, HM Modelltechnik involved in developing the mythical Concorde.

    Download

    CONCORDE Nose mounting Manual EN

    Download (1M)

    5 other products in the same category:

    My account

    Information

    © Copyright 2025 TURBINES RC. All Rights Reserved.

    Newsletter

    Follow us

    This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

    More information Customize cookies

    Cookie preferences
    Consent

    Functional cookies
    No
    Yes
    Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
    Cookie Provider Purpose Expiry
    PHP_SESSID www.turbines-rc.com The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. Session
    PrestaShop-# www.turbines-rc.com This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. 480 hours
    Analytics cookies
    No
    Yes
    Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.
    Cookie Provider Purpose Expiry
    _ga Google Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 2 years
    _gat Google Used by Google Analytics to throttle request rate 1 day
    _gat_gtag_UA_# Google Used to throttle request rate. 1 minute
    _gd# Google This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser. Session
    _gid Google Registers a unique ID that is used to generate statistical data on how the visitor uses the website. 1 day