VQ Douglas DC-3 1.8m ARF (Dakota)

VQ-DOU-DC3-US

New product

VQ Model

The Douglas DC-3 1800mm from VQ models is a finished model (ARF version) all wood in balsa and plywood. Its finish and model details make it a model close to size, in particular its landing gear. The model can be equipped with electric or combustion motors.

More details

Available on order

By buying this product you can collect up to 357 points . Your cart will total 357 points that can be converted into a voucher of US $8.43 .


US $421.85

Accessories and other versions

Must have accessories and options

Data sheet

Type of kit: ARF
Wingspan (mm): 1800mm (70.8in)
Length (mm): 1200mm (47.2in)
Flying weight (gr) 3.2kg (7.05lbs)
CG (Center of Gravity) Check manual
Servos 8x digital, 8x digital, 8x digital, 8x digital
Power System 2x Brushless Boost 25 / 25cc 2T , 2x Brushless Boost 25 / 25cc 2T , 2x Brushless Boost 25 / 25cc 2T , 2x Brushless Boost 25 / 25cc 2T
Battery Cells: 3s - 11.1v
Battery Capacity (mAh) 4.500 mAh
Surfaces Flaps
Landing Gear Fixed landing gear
Material Plywood
Build time 2 heures
Required Radio 6 channels minimum
Recommended pilot skill level Advanced
Wingspan 1650mm and Larger

More info

VQ Douglas DC-3 1.8m ARF (Dakota)

The Douglas DC-3 1800mm from VQ models is a finished model (ARF version) all wood in balsa and plywood. Its finish and model details make it a model close to size, in particular its landing gear. The model can be equipped with electric or combustion motors.

The Douglas DC-3 is a fixed-wing propeller-driven lt airliner. Its cruise speed (207 mph or 333 km/h) and range (1,500 mi or 2,400 km) revolutionized air transport in the 1930s and 1940s. Its lasting effect on the airline industry and World War II makes it one of the most significant transport aircraft ever made.

Features

  • All Balsa and lite-ply construction
  • Factory-Covered with Highly Detailed Film
  • Fiberglass cowling
  • Fiberglas nose
  • Control surfaces pre-hinged and installed
  • Three piece wing with Aluminium Wing Joiner
  • Large battery access hatch
  • Very Short Aassembly Time - Everything is Prefabricated

Technical specifications

  • Wingspan: 1800mm (70.8in)
  • Length: 1200mm (47.2in)
  • Electric Motor: 2x Boost 25 Motors or any Electric Motors
  • Glow Engine: 25cc - 2 T
  • RTF Weight: 3.2kg  (7.05lbs) (will vary with Equipment used)
  • Radio: 6 Channels
  • R/C Functions 
    • Rudder
    • Elevator
    • Ailerons
    • Flaps
    • Motor

Contents 

  • VQ Douglas DC-3 1.8m ARF (Dakota)
  • Assembly instructions with stage photos
  • Tail wheel assembly
  • Fiberglass cowling
  • Plastic dummy engine
  • Wheels
  • Scale fixed gear with spring inside
  • Decals and all hardware

Options (contact us)

  • E-Retracts with struts
  • GP option kit (engine mount & fuel tank) (not included)

Required

  • 2x Brushless Combo BOOST 25 motors or gas engines and fuel tank
  • 2x ECS
  • 2x propellers
  • Cable/wiring harness
  • Recommended Radio and Receiver: 6 channels
  • Battery 3S 11.1V 4500mAh Li-Po
  • 6x Master Digital Servo S2112 type
  • 2x Master Digital Servo DS3012 MG type
  • Reviews
  • No customer reviews for the moment.

    Write a review

    VQ Douglas DC-3 1.8m ARF (Dakota)

    VQ Douglas DC-3 1.8m ARF (Dakota)

    The Douglas DC-3 1800mm from VQ models is a finished model (ARF version) all wood in balsa and plywood. Its finish and model details make it a model close to size, in particular its landing gear. The model can be equipped with electric or combustion motors.

    Download

    30 other products in the same category:

    Customers who bought this product also bought: