SkyRC S60 Charger 60W 100-240V (2-4s 6A)

AC 100-240 V Input

With Built-In AC Adaptor and universal voltage AC 100-240V input, S60 charger can be used all over the world and no need additional adaptor.

Temperature Threshold

If the temperature limit is reached, the process will be terminated. This fonction is available by connecting optional temperature probe, not included in the package.

Built-in Cooling fan

With cooling fan built-in, it has better heat transfer function.

LiHV mode available

The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.

Different charging modes

Depending on different kinds of batteries, there are different charging modes to meet users' request :

• LiPo/LiFe/LiIon batteries : Normal charge, Balance charge, Fast charge, Discharge, Storage
• NiCd/NiMH batteries : Normal Charge, Auto Charge, Discharge, Cycle, Repeak
• Pb batteries : Normal charge, Discharge

Special features

Lithium battery balancer : SKYRC S60 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

Program Data Store/Load : The charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting.

Battery Meter : The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger.

Battery resistance meter : The user can check battery's total resistance, the highest resistance, the lowest resistance and each cell's resistance.

Maximum safety : Automatic Charging Current Limit, Capacity Limit, Temperature Threshold, Processing Time Limit. The Maximum Safety makes the charger safer than B6

Terminal Voltage Control : The charger allows user to set the charge/ discharge end voltage.

PC Control

The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs, and can also control charging and update firmware from "Charge Master".