Ducted Fan EDF Changesun 120mm + HET 800-73-590 motor

Ducted Fan EDF Changesun 120mm + HET 800-73-590 motor

This combo ChangeSun 120mm equiped with the Typhoon HET 800-73-590kv motor generates approx 7.5Kg of thrust / 120A with 12S.

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Note: this combo is provided assembled and balanced. You can also buy both the EDF unit and the motor separetly with us without the assembling and balancing service.

Note: ChangeSun EDF can be difficult to balance. Please allow a extra mounting time. 

A high thrust and well designed Electric Ducted Fan unit for high power applications, the 12 blade arrangement makes for a quiet fan unit with an amazing sound, this is the closest you will ever get to the sound of a Turbine!

Description:

• Outside Diameter: 128.2mm
• Rotor Diameter: 119.2mm
• Material: carbon fiber reinforced Nylon rotor
• Weight: 401g
• Suitable motor: 530KV-650KV for 12S
• Shaft adaptor to motor: 8mm
• Max RPM: 28000 RPM
• Motor Diameter: 52mm

Please note the delivered spiner is silver aluminium.

Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.