JETImodel Addcap 1640 View larger

JETImodel Addcap 1640 Capacitor

JET-22985483

New product

Capacitor to improve the power supply for low impedance drive systems.nThe backup capacitor should also be used if the cables between the battery and the regulator are extended by more than approx. 20cm (8in). Use a backup capacitor Addcap 1640 per 20cm (8in) extension. Suitable for use on cables with 2.5 to 6mm² cross-section (AWG14 to AWG10).

More details

Available

By buying this product you can collect up to 19 points . Your cart will total 19 points that can be converted into a voucher of US $0.45 .


US $22.52

Data sheet

Sizes: 60 x 35 x 24mm
Weight (gr): 27 gr

More info

JETImodel Addcap 1640 Capacitor

Placed between the main battery pack and speed controller (ESC) Capacitor Module buffers the power surges that can result from running extended leads between the pack and the ESC.

Description

AddCAP 820 and AddCAP 1640 are add-on capacitor units designed to enhance battery power supply for drive systems using low-impedance electric motors (1-2 pole), mostly Electric Ducted Fan or Geared Inrunner motors. They should also be used when the wires from your battery to your ESC need to be lengthened more than 200mm (8"). In cases where the wires are longer, use one AddCAP 820 or AddCAP 1640 for each 200mm (8") section. Another advantage of adding an additional capacitor is to reduce possible interference which may be caused by current moving through your power wires. Recommended for use with 2.5-6 mm2 (14AWG - 10AWG) wires.

As a matter of principle only cables from the battery to the controller can be extended.

Specificities

  • Max. input voltage 59V
  • Capacity 1640µF
  • Dimensions 60 x 35 x 24mm
  • Weight 27g

Capacitor Modules contain High-Voltage capacitor(s), the 820 size is recommended for current up to 100A and 1640 up to 300A. Jeti AddCAPs work up to 63V (15S) battery pack.
  • Reviews
  • No customer reviews for the moment.

    Write a review

    JETImodel Addcap 1640 Capacitor

    JETImodel Addcap 1640 Capacitor

    Capacitor to improve the power supply for low impedance drive systems.nThe backup capacitor should also be used if the cables between the battery and the regulator are extended by more than approx. 20cm (8in). Use a backup capacitor Addcap 1640 per 20cm (8in) extension. Suitable for use on cables with 2.5 to 6mm² cross-section (AWG14 to AWG10).

    Download

    10 other products in the same category:

    Customers who bought this product also bought: