EDF Ducted Fan HET 6904 / HET 1W-30

D1W30-6904

New

High End Technology RC (HET) 6904  EDF Ducted Fan with Typhoon HET EDF 1W-30 28mm 2720Kv brushless pre installed motor. Recommanded for 4s Lipo. Extrême 4s setup for models up to 2.4Kg.

More details

Available

By buying this product you can collect up to 105 loyalty points. Your cart will total 105 points that can be converted into a voucher of 3,15 €.


105,25 €

Add to wishlist

Data sheet

EDF Diameter Class (mm): 70
Blades: 4
Turns/min/Volt (Kv): 4400
Motor Type: In-Runner
Motor Diameter (mm): 28
Shaft diameter (mm): 4

More info

Extreme 4s Configuration!

 

High End Technology RC (HET) 6904  EDF Ducted Fan with Typhoon HET EDF 1W-30 28mm 4400Kv brushless pre installed motor. Recommanded for 4s Lipo. Extrême 4s setup for models up to 2.4Kg. 

The fan unit comes completely mounted with a HET 1W-30 motor.  The unit is assembled and checked at factory, precision balanced and harmonically tuned.

Set comprises:

  • 1 x High End Technology RC (HET) 6904 Ducted Fan Unit Fan unit with optional intake lip
  • 1 x HET 1W-30 motor
 
Specification:
 
  • Dynamcially balanced rotor
  • 4mm chuck adaptor
  • Motor pre-installed and balanced 
  • 3.5mm/4mm gold connector installed
  • Recommended for 4S lipo
  • Power Nominal: 1400 Watts on 4 cells
 
Recommended ESC setup:
 
  • Cutoff Voltage: Auto
  • Current Limiting: Standard
  • Brake Type: Disable
  • Timing Advance: Middle 18 deg
  • Cutoff Type: Hard
  • Start Type: Fast Start
  • Governor Mode: Auto
  • PWM: 16K
 
HET 6904 Ducted Fan Units standard description :
 

HET 4 Blade 6904 69mm EDF Ducted Fan for use with brushless motor like the HET 2W, 2W-20, 2W-23, 2w-25 or equivalent. Fits into a Wemotec mini fan space

The HET fan unit is a 480 class mini fan that comes with a cooling fan. The fan unit is compatible with Wemotec fan units. The fan unit is constructed of a carbon filled plastic and aluminum set up. The HET fan unit features a carbon reinforced housing. The stiffer housing will produce more thrust, better efficiency and less of a chance of a rotor blade breaking off the hub at higher rpm's.

  • Outside Diameter: 72mm
  • Inside Diameter: 69mm
  • Collet Adaptor Size: 3.175mm 
  • Weight: 56 grams - 68 grams (with cooling ring)
  • Rotor: 4 bladed (68mm) dynamically balanced
  • Comes complete with tools, instructions and intake ring
  • RPM Range: Up to 50,000 rpm
  • For use with brushless motor like the HET 2W, 2W-20, 2W-23, 2w-25 or equivalent.
  • Fits into a Wemotec mini fan space
 

Note: Use ahesive tape or CA glue to securely attach the intake ring to the fan unit before running the fan unit. Otherwise strong air current would blow out the intake ring.

 
About the 1w30 motor:
 

Typhoon HET EDF 1W-30 Motor 28mm 4400Kv, for pylon / EDF jets up to 2,8 Kgrams. Suitable for HET EDF unit 6904, WemoTec Mini Fan or equivalent. 4S power beast that generates 1400 watts and 2kgs thrust.

  • Diameter : 28 mm
  • Length : 52 mm
  • Shaft Dia. : 4 mm
  • Weight : 130 grams
  • No load current(lo) : 5.5
  • Internal resistance: 4.5 
  • KV : 4400
  • No. of poles: 6
  • Max Current: 120 A
  • Max efficiency: 87%
  • Power Nominal: 1400 Watts on 4 cells (6904 fan unit)
  • Advance timing : 18° Middle PWM: 16 Khz 
 

Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.

Important: We do not recommend to use the 1W30 motor with more than 4S lipo as it may burn the motor for high amp draw. 35C lipo cells are recommended.

Reviews

Write a review

EDF Ducted Fan HET 6904 / HET 1W-30

EDF Ducted Fan HET 6904 / HET 1W-30

High End Technology RC (HET) 6904  EDF Ducted Fan with Typhoon HET EDF 1W-30 28mm 2720Kv brushless pre installed motor. Recommanded for 4s Lipo. Extrême 4s setup for models up to 2.4Kg.

Write a review

30 other products in the same category:

Customers who bought this product also bought: