Brushless YGE OPTO 205 HVT Navy 4-14S Telemetry ECS View larger

Brushless YGE OPTO 205 HVT Navy 4-14S Telemetry ECS


New product


Brushless YGE OPTO 205 HVT Navy 4-14S Telemetry ECS

More details


By buying this product you can collect up to 474 points . Your cart will total 474 points that can be converted into a voucher of US $11.19 .

US $559.52

Data sheet

Sizes: 84x56x32mm
Weight (gr): Weight without wire: 223g Weight with wires: 296g
Max Intensity (A): 205A
Battery Cells: 4s - 14.8v, 5s - 18.5v, 6s - 22.2v, 7s - 21.77v, 8s - 29.6v, 9s - 33.3v, 10s - 37v, 12s - 44.4v, 14s - 51.8v
Connection: Delivered without plug

More info

Brushless YGE OPTO 205 HVT Navy 4-14S Telemetry ECS


"T" for Telemetry. Following protocols are currently compatible:

Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky, Core), MSH Brain 2 or Spirit FBL.

Using the optional USB adapter, the 205HVT can be changed and new updates can be added. In operation, the PWM frequency is always automatically adapted to the needs of the motor and is therefore always optimal. Due to the new sine wave starting of the 205HVT, the starting behavior is now SUPER SOFT.


  • Entirely overhauled hard- and software (32-bit)
  • the PWM-frequency will be set automatically to the requirements of the motor
  • The specified current is the maximum continuous full power current
  • 4 to 14s LiPo, incl under voltage protection by power reduction
  • 5 to 16s LiFePo4, incl under voltage protection by power reduction
  • Current limiting
  • Disconnectable under voltage detection
  • Electronic speed control (Governor- mode)
  • Soft start
  • Active free-wheel, allowing unlimited part load operation.
  • Automatic or 6 step adjustable timing
  • Adjustable EMK brake
  • F3A (Acro brake (brake force control infinitely adjustable)
  • Speed limit: 240.000 rpm (2- Poles)
  • Temperature and overload warning
  • Anti- flash: non included. We recommend the anti-flash connector AS150 with 300A peak on the battery side
  • Basic -Programming with mode programming
  • Fine adjustment and selection of telemetry log with the PC Setup
  • Suitable USB-adapter optionally available

Technical specifications

  • ECS: Opto 205A
  • BEC: without
  • Frequency: 16 à 32 kHz
  • Dimensions: 84 x 56 x 32mm
  • Weight with wires: 296g
  • Weight without wires: 223g
  • Cable diameter Battery / Motor: 8² / 8²


30 other products in the same category: