Brushless YGE 205 V2 HVT 4-14S Telemetry ECS View larger

Brushless YGE 205 V2 HVT 4-14S Telemetry ECS

YGE-205HVT

New product

YGE

Brushless YGE 205 V2 HVT 4-14S Telemetry ECS

More details

Available on order

By buying this product you can collect up to 474 points . Your cart will total 474 points that can be converted into a voucher of US $11.19 .


US $559.52

Data sheet

Sizes: 84x56x31mm
Weight (gr): Weight without wire: 219g Weight with wires: 287g
Max Intensity (A): 205A
SBEC (A) 5.0 à 8.4V
Battery Cells: 4s - 14.8v, 5s - 18.5v, 6s - 22.2v, 7s - 21.77v, 8s - 29.6v, 9s - 33.3v, 10s - 37v, 12s - 44.4v, 14s - 51.8v
Connection: Delivered without plug

More info

Brushless YGE 205 V2 HVT 4-14S Telemetry ECS

Specifications

"T" for Telemetry. Following protocols are currently compatible:

Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky, Core), MSH Brain 2 or Spirit FBL.

Using the optional USB adapter, the 205HVT can be changed and new updates can be added. In operation, the PWM frequency is always automatically adapted to the needs of the motor and is therefore always optimal. Due to the new sine wave starting of the 205HVT, the starting behavior is now SUPER SOFT.

Features

  • Entirely overhauled hard- and software (32-bit)
  • the PWM-frequency will be set automatically to the requirements of the motor
  • The specified current is the maximum continuous full power current
  • 4 to 14s LiPo, incl under voltage protection by power reduction
  • 5 to 16s LiFePo4, incl under voltage protection by power reduction
  • Pluggable receiver- and telemetry cables with JST-socket
  • Current limiting
  • Disconnectable under voltage detection
  • Electronic speed control (Governor- mode)
  • Soft start
  • Active free-wheel, allowing unlimited part load operation.
  • Automatic or 6 step adjustable timing
  • Adjustable EMK brake
  • F3A (Acro brake (brake force control infinitely adjustable)
  • Speed limit: 240.000 rpm (2- Poles)
  • Temperature and overload warning
  • Anti- flash: decreases the closing spark
  • Basic -Programming with mode programming
  • Fine adjustment and selection of telemetry log with the PC Setup
  • Suitable USB-adapter optionally available

Technical specifications

  • ECS: 205A
  • BEC: 5.0 to 8.4V
  • High BEC-current rating : 12A (permanent) to 30A (peak)
  • Frequency: 16 à 32 kHz
  • Dimensions: 84 x 56 x 31mm
  • Weight with wires: 287g
  • Weight without wires: 219g
  • Cable diameter Battery / Motor: 6² / 6²

Download

30 other products in the same category:

Customers who bought this product also bought: