Brushless YGE 95 LVT 2-6S Telemetry ESC

Brushless YGE 95 LVT 2-6S Telemetry ESC

Specifications

"T" for Telemetry. Following protocols are currently compatible:

Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky, Core), MSH Brain 2 or Spirit FBL.

Using the optional USB adapter, the 95LVT can be changed and new updates can be added. In operation, the PWM frequency is always automatically adapted to the needs of the motor and is therefore always optimal. Due to the new sine wave starting of the 95LVT, the starting behavior is now SUPER SOFT.

Features

• Entirely overhauled hard- and software (32-bit)
• the PWM-frequency will be set automatically to the requirements of the motor
• The specified current is the maximum continuous full power current
• 6 to 14s LiPo, incl under voltage protection by power reduction
• Current limiting
• Disconnectable under voltage detection
• Electronic speed control (Governor- mode)
• Soft start
• Active free-wheel, allowing unlimited part load operation.
• Automatic or 6 step adjustable timing
• Adjustable EMK brake
• F3A (Acro brake (brake force control infinitely adjustable)
• Speed limit: 240.000 rpm (2- Poles)
• Temperature and overload warning
• Anti- flash: decreases the closing spark
• Basic -Programming with mode programming
• Fine adjustment and selection of telemetry log with the PC Setup
• Suitable USB-adapter optionally available

Technical specifications

• ECS: 95A
• Adjustable HV BEC: 5.5 to 8.4V
• High BEC-current rating : 8A (permanent) to 18A (peak)
• Frequency: 16 à 32 kHz
• Dimensions: 78 x 32 x 15mm
• Weight with wires: 93g
• Weight without wires: 63g
• Cable diameter Battery / Motor: 2.5² / 1.5²