ZTW Mantis G2 130A HV ESC 6-14S OPTO

ZTW-2130411

New product

ZTW Brushless Controls

NEW 32-Bit ZTW Mantis G2 130A HV ESC 6-14S OPTO for RC Airplanes and Helicopters.

More details

Available

By buying this product you can collect up to 124 points . Your cart will total 124 points that can be converted into a voucher of US $2.93 .


US $147.40

Data sheet

Sizes: 48 mm x 80 mm x 21 mm
Weight (gr): 142 gr
Max Intensity (A): 130A
Battery Cells: 6s - 22.2v, 7s - 21.77v, 8s - 29.6v, 9s - 33.3v, 10s - 37v, 12s - 44.4v, 14s - 51.8v
Connection: Delivered without plug
Battery Cells Compatibility: 8-38 NC / 6-12 LiPo

More info

ZTW Mantis G2 130A HV ESC 6-14S OPTO

NEW 32-Bit ZTW Mantis G2 130A HV ESC 6-14S OPTO for RC Airplanes and Helicopters.
The holes on both sides of the ESC and the unique fan guard structure has been improved heat dissipation. The special fan guard leads the airflow from the fan to the inside of the ESC, which enhances the internal airflow circulation, and takes away more heat for the ESC. It significantly enhances the heat dissipation effect of the ESC, and makes the ESC work more stable and cooler in various harsch environments.
Adopting imported IC components and advanced PCB craft brings the ESC with low heat generation and great current endurance, which makes the ESC more reliable and stable.
With the NEW unique circuit design and improved algorithm, and equipped with the powerful and high-performance 32-Bit microprocessor, it greatly improves the computing capability which makes the ESC respond more faster.
The new ESC supports switching the motor rotation.
With synchronous rectification, it can significantly reduce the heating of the ESC, which makes the ESC is more energy-saving and driving efficiency.
Supporting real-time data-sending feature: current, voltage, temperature, RPM, throttle and ESC status. And you can check the data with the App in real time.
The ESC has a separate programming interface to connect with LCD programming card or App adaptor for parameter setting, which is more easier and convenient. 

Features

  • Super smooth and accurate throttle linearity
  • Higher driving efficiency and more energy-saving
  • Two modes: normal and soft acceleration
  • Multiple protections: start-up, over-heat, low-voltage cutoff, over-load, over-current and signal loss.
  • Safety thermal over-load protection
  • Auto throttle shut down in signal lose situation
  • Over-heat protection: When the temperature of ESC exceeds 110 degrees C, the ESC will reduce the output power to allow it too cool.
  • Lost signal protection: The ESC will automatically cut power to the motor when it detects a lost of throttle signal for 2 seconds, then the motor will emit a continuous beeping tone.
  • Supports high RPM motors and is compatible with most motors in the market.

Specifications

  • Continuous Current: 130A
  • Burst Current: 150A
  • Battery: 6-14S Lipo
  • BEC Output: No BEC. OPTO.
  • Size: 78mm x 45mm x 32mm
  • Weight: 180g

Programming

  • Done by Transmitter
  • 4 different brake modes
  • Battery types: NiCd/NiMh/LiPo/LiFe
  • Low Voltage Cut-off
  • Low Voltage protection: 2.8 - 3.2V
  • Governor Mode
  • Frequency: 8 or 12khz
  • Lipos: 6 to 14S or auto
  • Motor timing: 0 to 30°

Download

30 other products in the same category:

Customers who bought this product also bought: