Typhoon HET EDF 700-68 Motor 39mm 1680Kv

HET-700-68-1680

New

Typhoon HET EDF 700-68-1680 Motor 39mm, recommended for 6s to 8s Lipo and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades for 8s Lip, for 9 bladed 90mm JETFAN-90 EDF unit type for 8s and Stumax EDF type 90mm for 6s Lipo.

More details

Available

By buying this product you can collect up to 125 loyalty points. Your cart will total 125 points that can be converted into a voucher of 3,75 €.


125,00 €

Add to wishlist

Data sheet

Motor Type:In-Runner
Motor Diameter (mm):39

More info

Typhoon HET EDF 700-68 Motor 39mm 1680Kv

Typhoon HET EDF 700-68-1680 Motor 39mm, recommended for 6s to 8s Lipo and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades for 8s Lipo. Recommended for 9 bladed 90mm JETFAN-90 EDF unit type for 8s and Stumax EDF type 90mm for 6s Lipo. Also suitable for any 90mm ducted fan units using 39mm motor's diameter. This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.

Description:

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced

Specification:

  • Diameter: 39 mm 
  • Length: 67,5 mm
  • Shaft Dia.: 5 mm 
  • Weight : 335 grams
  • No load current(lo): 1.9(10v)
  • Rm (Ohm) : 8.90
  • KV: 1680
  • Poles: 4
  • Max efficiency: 85%
  • Recommended advance timing: low
  • Power Nominal: 1400 Watts (max: 3000 W)
  • Recommended ESC from 75A (6s) to 120A (8s)
  • Specially designed for 9305-700 fan unit
  • Includes Aluminum Heat Sink and tools
 
Note: This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.
Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
Warning: Screws that are too long can short out the windings resulting in a cooked motor, this is not covered by warranty

HET 700-60 specs

Reviews

Write a review

Typhoon HET EDF 700-68 Motor 39mm 1680Kv

Typhoon HET EDF 700-68 Motor 39mm 1680Kv

Typhoon HET EDF 700-68-1680 Motor 39mm, recommended for 6s to 8s Lipo and suitable for any 90mm ducted fan units using 39mm motor's diameter. Recommended for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent from 4 to 6 blades for 8s Lip, for 9 bladed 90mm JETFAN-90 EDF unit type for 8s and Stumax EDF type 90mm for 6s Lipo.

Write a review

30 other products in the same category:

Customers who bought this product also bought: