Typhoon HET EDF 700-68 Motor 39mm 1200Kv (5mm shaft)

Typhoon HET EDF 700-68 Motor 39mm 1200Kv

Typhoon HET EDF 700-68-1200 Motor 39mm, recommended for 8s to 12s Lipo and ducted fan units from 90mm to 120mm using 39mm motor's diameter. Designed for 90mm HET EDF unit 9305-700, Schubeler DS 51 or equivalent. Perfect for 90mm JETFAN-90 EDF units for 10 or 12s Lipo and 90mm Stumax EDF units for 8 or 10s Lipo. This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.

Description

• High Temperature magnets and stator wire
• 0,2mm silicon steel stator from Japan
• Hardened shaft
• CNC precision parts
• Dynamically balanced

Specifications

Note: This motor will not work with WeMoTec Midi Fan or the HET 9305 fan unit.

Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Warning: Screws that are too long can short out the windings resulting in a cooked motor, this is not covered by warranty