Typhoon HET EDF 650-68-1130 Motor 36mm,...
Purchase a gift voucher
Typhoon HET EDF 650-68-1130 Motor 36mm, recommended for 10s or 12s configuration. Suitable for 90mm HET EDF unit 9305 and WeMotec Midi Fan pro and evo. Thrust: 3.3kgs (37V) / 4.6 kgs (44,4V) with a HET 9305 EDF unit.
Warning: Last items in stock!
By buying this product you can collect up to 125 loyalty points. Your cart will total 125 loyalty points that can be converted into a voucher of 3,75 €.
|Motor Diameter (mm):||36|
The 650 Series from HET are designed around the hugely successful 700 series construction but in a smaller case size to suit fans that take 36mm motors.
Typhoon HET EDF 650-68-1600 Motor 36mm, recommended for 10 to 12s configuration. Suitable for 90mm HET EDF unit 9305 and WeMotec Midi Fan pro and evo or Schubeler DS-51-AXI HDS.
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
50cm Servo Extension Cable Futaba JR. Flat wire.
New V3 2016 version. A high thrust and well designed Electric Ducted Fan unit...
100cm Servo Extension Cable Futaba JR. Flat wire.
Thermal Paste for Motor Heat Sink - 1g
This program box is used to program the HET brushless ESC from the Zeus series.
HET 5 Blade 9305 90mm EDF Ducted Fan for Typhoon 600 brushless motors (36mm...
HET ZEUS 150A HV ESC 6-12S OPTO. HET speed controllers are specifically...
XT60 Serial Connection Cable
Heat Sink 75mm for 50mm Motor and Ejets Jetfan 120 EDF
Typhoon HET 800-73 series brushless motors are designed for 110mm, 120mm and...