Typhoon HET EDF 650-68 Motor 36mm 1500Kv View larger

Typhoon HET EDF 650-68 Motor 36mm 1500Kv

HET-650-68-1500

New

Typhoon HET EDF 650-68-1500 Motor 36mm, recommended for 8s or 10s configuration. Suitable for 90mm HET EDF unit 9305 and WeMotec Midi Fan pro and evo. Thrust: 3.5kgs (29.6V) / 5.0 kgs (37V) with a HET 9305 EDF unit.

More details

Available

By buying this product you can collect up to 125 loyalty points. Your cart will total 125 points that can be converted into a voucher of 3,75 €.


125,00 €

Add to wishlist

Data sheet

Motor Type:In-Runner
Motor Diameter (mm):36

More info

The 650 Series from HET are designed around the hugely successful 700 series construction but in a smaller case size to suit fans that take 36mm motors.

Typhoon HET EDF 650-68-1500 Motor 36mm, recommended for 8s or 10s configuration. Suitable for 90mm HET EDF unit 9305 and WeMotec Midi Fan pro and evo. Thrust: 3.5kgs (29.6V) / 5.0 kgs (37V) with a HET 9305 EDF unit.

Description:

  • High Temperature magnets and stator wire
  • 0,2mm silicon steel stator from Japan
  • Hardened shaft
  • CNC precision parts
  • Dynamically balanced
 

Specification:

  • Diameter: 36 mm 
  • Length: 67,5 mm
  • Shaft Dia.: 5 mm 
  • Weight: 300 grams
  • No load current(lo): 1.8
  • Internal resistance: 13
  • KV: 1500
  • Poles: 4
  • Max Current: 120 A (10s)
  • Max efficiency: 88%
  • Recommended advance timing: low (5-7 degrees)
  • Power Nominal: 3500 watts
  • Recommended ESC from 150A (10s)
  • Suggested cell No: 8-10S
  • Specially designed for 9305 & Midi fan unit (pro and evo)
  • Includes Aluminum Heat Sink and tools
 
  
Note: Use adhesive adhésive or glue to securely attach the cooling ring to the motor before running the motor. In case of use with an EDF fan unit, strong air current could blow away the colling ring. Thermal paste usage is also recommended.

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Reviews

Write a review

Typhoon HET EDF 650-68 Motor 36mm 1500Kv

Typhoon HET EDF 650-68 Motor 36mm 1500Kv

Typhoon HET EDF 650-68-1500 Motor 36mm, recommended for 8s or 10s configuration. Suitable for 90mm HET EDF unit 9305 and WeMotec Midi Fan pro and evo. Thrust: 3.5kgs (29.6V) / 5.0 kgs (37V) with a HET 9305 EDF unit.

Write a review

20 other products in the same category:

Customers who bought this product also bought: